vitotai

I added the filter in a new testing branch. You can try it. https://github.com/vitotai/BrewPiLess/tree/PressureMonitor However, I don't think it would work well with variation like that.

Get the binary with 3.6p.

 FYI, I don't get stable readings from my sensor, either. The correct reading should be steady 0. The 1.8 peak value at 16:30 is already...

Well. I've changed the design. Now, there is no WiFiManager. I guess it might have something to do with settings. Try flashing via USB. If it still doesn't work. Try...

The graph is currently under development. The calibration processes of iSpindel and pressure transducer are different. The real formula of iSpindel is an arctangent formula, if we can find one....

First of all, you don't know how good it really works. (well, I think I found some information about his setup. you can check the picture in this thread: https://www.homebrewtalk.com/forum/threads/my-mostly-automated-brucontrol-setup.646559/page-5#post-8389647...

A little googling led me to this issue: https://github.com/esp8266/Arduino/issues/2070 I will try me best, but we might not be able to get stable readings unless turning off WiFi, which is...

Just push the updated code with graph. https://github.com/vitotai/BrewPiLess/tree/v37alpha The tricks mentioned in the issue above are used, and it seems to work fine for me. I got around 0.5 psi...

oops. My bad. Please try again with the *pre2.bin

I tried but couldn't reproduce this issue. However, I just tried by faked heating, which just rises the "temperature" instead of reads from the sensor. Furthermore, during HopStand, the heating...