visualapproach
visualapproach
Well it's peculiar. Unfortunately the voltage reading is not conclusive. There are pull up resistors on the inputs so they will read almost 5V even when disconnected. I made a...
@msggsm You could do the `/inputs` test, and `/hwtestinfo.html`. Maybe the new pump is not compatible?
> > Well it's peculiar. Unfortunately the voltage reading is not conclusive. There are pull up resistors on the inputs so they will read almost 5V even when disconnected. I...
Sorry @petekn but I can't do much with those movies. Other than confirm some wires has activity at some time. And it's a bit too complicated to try to describe...
Hi there, the climate card is converting everything thrown at it to the unit set in HA general settings. So go to HA settings-system-general and set C Thx
Lovely @DeanozUK ! Thank you for sharing this info. I'll update the docs. And also the master branch. Wasn't aware it was failing at compilation. Thanks again!
Yes, sending the time as text in an MQTT message should work. `{CMD: 19, VALUE: 1, XTIME: 1714589520, INTERVAL: 0, TXT: 'test'}`
I should've mentioned that text only works for the 6-wire displays. Do you have that?
Ok I'll do some tests. If you send text from the web ui (config) it works?
No. At least, it doesn't :)