cutcutgo

cutcutgo copied to clipboard

No matter what $10=0 or other, position report "?" does not change.

jorgerobles

The install as per the instructions (pip3 install .) fails in the dreaded wheel error (online forums are full for various python3 apps) on recent ubuntu versions: ERROR: Failed building...

idpnd

Circle are not a real circle

1

Hello, I installed the cutcutgo firmware on my maker 1 but the circles are not good, a square looks great. Any idea of what is wrong? 

bvdberg01

Large steps when changing direction

2

Hi, I noticed that when one of the motors changes the direction, in the next command it moves more than expected. If it's in the same direction as in the...

koneklaudio

Speed control

2

Hi, is there a way to control the cutting speed? The F feed parameter apparently does not affect to the speed. Thanks.

koneklaudio

Cricut Maker - Compatibility?

3

Hi there, I have a Cricut Maker, model number CXPL301, S/N: P130920I1534. The board contained in the machine is has the following spec: PCB number ATH-84-110-X2 The micro is a...

Brynod

Hi i have this board Is compatibile?    

Chris959595

Pushing a button when GRBL is in idle state allows the tool head to come to the center of X axis and let the user change any tool. Another push...

virtualabs

InkCut project need to be modified in order to allow tool and material selection for Cricut Maker. InkCut then uses these information to produce a custom GCODE (tool selection +...

virtualabs