arduino-konami-spoof
arduino-konami-spoof copied to clipboard
veroxzik
Drop-in library to replicate IIDX and SDVX controllers using Arduino
arduino-konami-spoof
Drop in library to replicate IIDX and SDVX controllers using Arduino.
This library only works with the Leonardo and Micro (or Leo / Micro / Pro Micro clones).
This includes core files from Arduino Core 1.8.2.
HOW TO INSTALL
Close the Arduino IDE and place the arduino-konami folder into your local hardware folder.
On a typical Arduino install, this is located in Documents\Arduino\hardware.
On portable installations, this is located in arduino\portable\sketchbook\hardware.
Restart the Arduino IDE and select the appropriate board from Tools -> Board -> Konami Controllers.
Then, simply use any standard joystick library to play the game as normal. MHeironmius's Library works well.
HOW TO USE
IIDX
The following must be adhered to:
| Joystick Button | IIDX Key |
|---|---|
| B1 | KEY 1 |
| B2 | KEY 2 |
| B3 | KEY 3 |
| B4 | KEY 4 |
| B5 | KEY 5 |
| B6 | KEY 6 |
| B7 | KEY 7 |
| B9 | KEY E1 |
| B10 | KEY E2 |
| B11 | KEY E3 |
| B12 | KEY E4 |
| X-AXIS | TT |
SDVX
The following must be adhered to:
| Joystick Button | SDVX Key |
|---|---|
| B1 | BT A |
| B2 | BT B |
| B3 | BT C |
| B4 | BT D |
| B5 | FX L |
| B6 | FX R |
| B9 | START |
| X-AXIS | VOL-L |
| Y-AXIS | VOL-R |
HOW TO REVERT
When you wish to revert the board back to a normal state, begin an upload for a normal Arduino sketch and restart the board by shorting the RST pin to GND, or by pressing the Reset button if your board has one.
Credits
Arduino Core
Ziemas for the IIDX profile
SirusDoma for the SDVX profile
veroxzik