vtoyboot
vtoyboot copied to clipboard
ventoy
debain 11.7 bash 运行vtoyboot.sh报错Current OS is not supported!
### ### ### ### ### ###
root@debian-ventoy:/home/vtoy/vtoyboot-1.0.29# bash vtoyboot.sh
vtoyboot 1.0.29
longpanda [email protected]
https://www.ventoy.net
Current OS is not supported!
### ### ### ### ### ###
排查了一下发现是update-initramfs命令未找到，但是initramfs-tools已安装
### ### ### ### ### ###
root@debian-ventoy:/home/vtoy/vtoyboot-1.0.29/distros/initramfstool# root@debian-ventoy:/home/vtoy/vtoyboot-1.0.29/distros/initramfstool# update-initramfs bash: update-initramfs：未找到命令 root@debian-ventoy:/home/vtoy/vtoyboot-1.0.29/distros/initramfstool# sudo apt-get install initramfs-tools 正在读取软件包列表... 完成 正在分析软件包的依赖关系树... 完成 正在读取状态信息... 完成 initramfs-tools 已经是最新版 (0.140)。 升级了 0 个软件包，新安装了 0 个软件包，要卸载 0 个软件包，有 0 个软件包未被升级。
### ### ### ### ### ###
后来通过find命令发现其实是有update-initramfs文件的，但是在/sbin里，添加了/sbin环境后就运行成功了。。
### ### ### ### ### ###
root@debian-ventoy:/home/vtoy/vtoyboot-1.0.29# find / -name update-initramfs /usr/sbin/update-initramfs /usr/share/bash-completion/completions/update-initramfs /var/lib/dpkg/triggers/update-initramfs find: ‘/run/user/1000/gvfs’: 权限不够 root@debian-ventoy:/home/vtoy/vtoyboot-1.0.29# export PATH=/sbin:$PATH root@debian-ventoy:/home/vtoy/vtoyboot-1.0.29# bash vtoyboot.sh
vtoyboot 1.0.29
longpanda [email protected]
https://www.ventoy.net
Current system use initramfstool as initramfs tool updating the initramfs, please wait ... update-initramfs: Generating /boot/initrd.img-5.19.0-0.deb11.2-amd64 grub mkconfig ... PROBE_PATH=/sbin/grub-probe MKCONFIG_PATH=/sbin/grub-mkconfig /sbin/grub-mkconfig -o /boot/grub/grub.cfg Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.19.0-0.deb11.2-amd64 Found initrd image: /boot/initrd.img-5.19.0-0.deb11.2-amd64 Adding boot menu entry for UEFI Firmware Settings ... done GPT check /dev/sda OK ... PREFIX=/boot/grub CFG=grub.cfg DISK=/dev/sda MOD_PATH=/boot/grub Write loader to /dev/sda ... replace shim efi ... bootx64.efi no need 0
vtoyboot process successfully finished.
### ### ### ### ### ###
以挂载物理u盘的形式，成功在vmware里通过ventoy启动
