Ventoy icon indicating copy to clipboard operation
Ventoy copied to clipboard

Published 20 hours ago • verified publisher icon ventoy

[issue]: Proxmox 8.1 Fails

Open ckdarby opened this issue 1 year ago • 45 comments

Official FAQ

  • [X] I have checked the official FAQ.

Ventoy Version

1.0.96

What about latest release

Yes. I have tried the latest release, but the bug still exist.

Try alternative boot mode

Yes. I have tried them, but the bug still exist.

BIOS Mode

Both

Partition Style

MBR (Not sure)

Disk Capacity

64 GB

Disk Manufacturer

SANKESU

Image file checksum (if applicable)

Yes.

Image file download link (if applicable)

https://enterprise.proxmox.com/iso/proxmox-ve_8.1-1.iso

What happened?

Able to initially boot into Proxmox GUI, but then media ISO cannot be found.

No issue with proxmox 7.4 on this USB stick.

ckdarby avatar Nov 24 '23 04:11 ckdarby

Have the same issue. 8.0 iso image works.

Tested with grub2 & normal boot.

Partition Style: GBT

Ventoy Version 1.0.96

More details:

Welcome to the Proxmox VE 8.1 installer
initial setup startup mounting proc filesystem
mounting sys filesystem
EFI boot mode detected, mounting efivars filesystem
boot comandline: BOOT_IMAGE=/boot/linux26 ro ramdisk_size=16777216 rw quiet splash=silent
loading drivers: ahci nvme wmi mac_hid acpi_pad video acpi_tad spi_intel_pci xhci_pci i2c_i801 acpi_cpufreq rtc_cmos efi_pstore pcspkr intel_cstate rapl aesni_intel ghash_clmulni_intel polyual_clmulni crc32_pclmu1 crct10dif_pclmul kvm_intel intel_powerclamp x86_pkg_temp_thermal intel_tcc_cooling intel_uncore_frequency intel_rapl_common
modprobe : ERROR : could not insert 'intel_tcc_cooling': No such deuice
searching for block device containing the ISO proxmox-ve-8.1-1
with ISO ID '1417249e-89f2-11ee-9dc2-bf4a21bd54a0'
testing again in 1 seconds
testing again in 2 seconds
testing device '/dev/sda' for ISO
testing again in 3 seconds
testing device '/dev/sda' for ISO
testing again in 4 seconds
testing again '/dev/sda' for ISO
testing again in 5 seconds
testing again '/dev/sda' for ISO
testing again in 6 seconds
testing again '/dev/sda' for ISO
testing again in 7 seconds
testing again '/dev/sda' for ISO
testing again in 8 seconds

[ERROR] no device with valid ISO found, please check your installation medium
unable to continue (type exit or CTRL-D to reboot)

Picture: proxmox_iso_81_small

patrick-othmer avatar Nov 24 '23 18:11 patrick-othmer

Thank you for the additional feedback. This is exactly what I faced :+1:

ckdarby avatar Nov 24 '23 19:11 ckdarby

same issue

seiry avatar Nov 25 '23 08:11 seiry

Also happens here. I know they added secure boot in version 8.1. Don't know if it could be something to do with that?

LarsNorgaard avatar Nov 25 '23 19:11 LarsNorgaard

Same here, tried to enable secure boot but I just get a black screen eight after the boot screen. Went "bare metal" instead and that works with secure boot enabled.

aktentasche avatar Nov 25 '23 20:11 aktentasche

Hello, I've got the exact same problem with Proxmox 8.1 ISO... It worked wihout any problem yesterday with Proxmox 8.0-2 ISO.

Here what I get: image

I've been running ventoy on a Corsair Survivor 32 Go USB Key. Here my technical infos:

Official FAQ

  • [x] I have checked the official FAQ.

Ventoy Version

1.0.96

What about latest release

Yes. I have tried the latest release, but the bug still exist.

Try alternative boot mode

Yes, Tried with or without Secure Boot -> same error.

BIOS Mode

UEFI

Partition Style

GPT

Disk Capacity

32 GB

Disk Manufacturer

Corsair

Image file checksum (if applicable)

Yes.

Image file download link (if applicable)

https://enterprise.proxmox.com/iso/proxmox-ve_8.1-1.iso

MilesTEG1 avatar Nov 25 '23 22:11 MilesTEG1

I'm facing the same problem right now with latest ISO

roadev avatar Nov 28 '23 08:11 roadev

Exactly the same issue here. Using Rufus with the exact same .iso for 8.1 works fine though

dkravetz avatar Nov 28 '23 22:11 dkravetz

Can confirm no ISO found with ventoy and proxmox 8.1 edit: Proxmox 8.0.2 worked for me

derkrasseleo avatar Dec 02 '23 11:12 derkrasseleo

same issue

bAH7JgbXrMsXEhggm4 avatar Dec 03 '23 06:12 bAH7JgbXrMsXEhggm4

Same for me

poke @MilesTEG1

EVOTk avatar Dec 04 '23 13:12 EVOTk

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

ventoy avatar Dec 04 '23 15:12 ventoy

Proxmox VE 8.1-1 ISO install with ventoy CI release 12041513 worked on my Super Micro Server. Thank you for the fix!

KlausKurz avatar Dec 04 '23 16:12 KlausKurz

Can also confirm with 12041513 and Proxmox VE 8.1-1, thank you!

derkrasseleo avatar Dec 04 '23 19:12 derkrasseleo

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

I had the same issue and this release solved it for me too. Thanks.

MrWaloo avatar Dec 12 '23 12:12 MrWaloo

Hi,

I am experiencing the same issue.

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

I had the same issue and this release solved it for me too. Thanks.

I just tested this, and it resolves the issue for me! Thanks!

PhilippHufnagl avatar Dec 14 '23 10:12 PhilippHufnagl

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

had the same issue this solved it 👍

aveekbhat avatar Dec 16 '23 03:12 aveekbhat

Had this problem as well (on version 1.0.96) and now the linked ci release (12041513) works perfectly

thibaultmol avatar Dec 21 '23 13:12 thibaultmol

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

same issue, this solved it 👍

olduck avatar Dec 22 '23 20:12 olduck

Also ran into this, can confirm that CI release is working for 8.1

sniff122 avatar Dec 29 '23 16:12 sniff122

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

it works for me, thx

imdingtalk avatar Jan 03 '24 13:01 imdingtalk

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

updating to this did not solve the issue - i still get verification failed (0x1A) seruity violation only disabling secure boot resolves this

tomshomelab avatar Jan 05 '24 12:01 tomshomelab

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

updating to this did not solve the issue - i still get verification failed (0x1A) seruity violation only disabling secure boot resolves this

Same on my machine, still could not boot Proxmox.

Cereal-Killa avatar Jan 05 '24 14:01 Cereal-Killa

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

updating to this did not solve the issue - i still get verification failed (0x1A) seruity violation only disabling secure boot resolves this

Same on my machine, still could not boot Proxmox.

found a small workaround via the ventoy website about secure boot - the page itself is outdated but you can navigate your way through finding a solution with this method with trial and erorr.

There is a screen that will appear called "enroll MOK" you can, as the gifs on the site kind of exaplain" enroll ventoy in the MOK thing and will allow you to boot into your ventoy stick.

I chose the first option "enroll" however you need to select VENTOY to find the file that you see in the gif on the link above. If its not in that specific location then keep looking around for either location.

From reading other blogs about PCIE passthrough and enrolling other devices in MOK once youve done this once you dont need to do it again.

tomshomelab avatar Jan 05 '24 14:01 tomshomelab

Worked for me. Curious if there is an ETA when this will be released into an official release version?

kiloforce avatar Jan 18 '24 01:01 kiloforce

Hi all, Please try this CI release: https://github.com/ventoy/Ventoy/actions/runs/7088423200 About CI release: https://www.ventoy.net/en/doc_github_ci.html

worked for me too

seanakdh avatar Jan 22 '24 14:01 seanakdh

Hi all,

I had the same problem and CI release (12041513) solved the problem. Also the new release (1.0.97 atm) works like a charm. Thx for the bugfix.

Luki72 avatar Jan 24 '24 19:01 Luki72

Can ventoy also boot proxmox from a UEFI zfs raw disk? Is this issue only affecting the initial iso setup or also raw boot of installed proxmox?

Or that is a question for https://github.com/ventoy/vtoyboot project?

My installation on on top of debian so likely would hit this: https://github.com/ventoy/vtoyboot/issues/76

SemanticBeeng avatar Jan 25 '24 16:01 SemanticBeeng

I have just confirmed this is fixed by updating my ventoy to the latest release v1.0.97. As it is release here this issue can be closed.

Quadrubo avatar Feb 20 '24 18:02 Quadrubo

proxmox-ve_8.1-2.iso starts successfully with Ventoy v1.0.97 (while v1.0.95 couldn't). Installation was fine in text mode.

 % sha256sum *.iso
f3e3d2a6ad8e44020a499855475a304dbb672c284410a3792826098c906c63c0  proxmox-ve_8.1-2.iso

UEFI, test environment: Lenovo ThinkPad X140e.

The issue can be closed.

vazhnov avatar Feb 28 '24 20:02 vazhnov