Ventoy
Ventoy copied to clipboard
ventoy
2 verified Fedora isos failed, not other distro.
Official FAQ
- [X] I have checked the official FAQ.
Ventoy Version
ventoy-1.0.64-linux.tar.gz
What about latest release
Yes. I have tried the latest release, but the bug still exist.
BIOS Mode
UEFI Mode
Partition Style
MBR
Disk Capacity
120gb
Disk Manufacturer
Crucial
Image file checksum (if applicable)
Yes.
Image file download link (if applicable)
https://download.fedoraproject.org/pub/fedora/linux/releases/35/Spins/x86_64/iso/Fedora-KDE-Live-x86_64-35-1.2.iso
What happened?
A bug happened!
See picture below. Same with Fedora 35 Workstation and Fedora 35 KDE (later is my target). Checksum of the iso in Ventoy disk is valid for both, as well for Ventoy archive. Same isos work flawless on Qemu.
Elementary 6 works fine. Mint LMDE give blinking cursor.
In the meantime I'll use Fedora boot installer because hehh, stuck.
Thank you!
Please checksum the ISO file as https://www.ventoy.net/en/doc_checksum.html and upload the screenshot.
Thank you booth, unfortunately I had no time to get back to this lately.
That said I already tried the m hotkey but it did nothing! I just realized that it's probably due to localisation? It's a usual headache quirk when debugging.
I'm on french AZERTY. Does Ventoy locate the keyboard ?
Please checksum the ISO file as https://www.ventoy.net/en/doc_checksum.html and upload the screenshot.
ventoy 版本 1.0.65 （以 Fedora LABS 中的 Fedora 35 Scientific iso 文件为例）复现这个问题 U盘信息 设备内部 Ventoy 版本 1.0.65 ， GPT 分区格式，支持安全启动（虚拟机内未启用安全启动支持） 在 VMware® Workstation 16 Pro （ UEFI 模式）中用 硬盘----»物理磁盘----»使用整个磁盘（U盘） 可以正常启动 Fedora ，用 虚拟机----»可移动设备----»U盘 可复现这个问题 iso 文件散列值一致
iso 文件下载链接 https://download.fedoraproject.org/pub/alt/releases/35/Labs/x86_64/iso/Fedora-Scientific_KDE-Live-x86_64-35-1.2.iso iso 文件散列值 # Fedora-Scientific_KDE-Live-x86_64-35-1.2.iso: 4426297344 bytes SHA256 (Fedora-Scientific_KDE-Live-x86_64-35-1.2.iso) = cc288c5e6b29213a9d7c9774fd4e64789e4cb46e33df0ba0be6dc6822fbf9327
启动失败截图
点击确定后
@MinGGeMG-sourcecode 启动到Ventoy界面上先按 c 进入命令行，执行 vtbreak 0 1 回车，然后按 ESC 返回，再选择ISO文件启动。会打印一些调试信息，截图看看。
@MinGGeMG-sourcecode 启动到Ventoy界面上先按
c进入命令行，执行vtbreak 0 1回车，然后按ESC返回，再选择ISO文件启动。会打印一些调试信息，截图看看。
