PXE
PXE copied to clipboard
ventoy
The open source part of iVentoy.
When I create a symlink or manually copy to iso folder on ventoy and click refresh the entire process crash and I need to remove the symlink or delete the...
我正在研究使用树莓派搭建PXE服务器，看到iventoy方案比较方便就尝试了一下，但是使用官方的文件包还是尝试使用源码，都没有安装成功，请给一个解决方案，谢谢 
Hello. So, I added symlinks to the ISO folder (folders with folders and then ISOS inside of them), and Iventoy GUI crashed, and the process started chewing memory until my...
After iVentory loads from PXE boot, and you select the ISO image (Windows in my case), you get a blinking cursor that never goes away on the client side. Looked...
Hi, is this software running on ARM architecture? When I try to run `iventoy.sh` in directory _/opt/iventoy-1.0.20_ on my _Raspberry Pi Debian 12 armv6l_ I get this (debug) output: ```...
I've noticed this on a few test images (reproducible with mt86plus_620_64.iso; https://memtest.org/). iventoy 1.0.12 (occurs on .11 too). iventoy using default 1024x768. Proxmox VM defaults to 1280x800. ^ this is...
Hello everyone, I have a similar problem as the following post https://forums.ventoy.net/showthread.php?tid=2835 I signed up for the forum but I have not received an email to confirm my account, for...
Hi I try to run the [ZimaBoard ISO](https://docs.zimaboard.com/faq/Restore-factory-settings.html) to do a firmware install on a ZimaBoard board. But it did not work. The first picture come up fine:  When...
Hi, I am unable to load files from iventoy. I receive the following error: ``` 2023/11/29 19:59:20.241 [TFTP] DHCP External client 192.168.1.10 should use loader ipxe.bios.0 2023/11/29 19:59:20.241 [TFTP] Start...
