Help

[aaroniza0]

Hello,

I'm a senior computer engineering student working on my senior design project at the moment, my project requires reading some hardware through ethernet and the hardware lists xcp on udp/ip as the communication protocol.

My team has to use a raspberry pi, would this program achieve this and work on the pi? If so, how would I install it on my raspberry pi?

Also, would it be possible to use python to read the values being read from the hardware?

Thanks,

aaroniza0

[George117]

Hi, Building instructions you can fiind here: https://github.com/vectorgrp/XCPlite/blob/master/README.md

As to measuring: you can take a look at https://github.com/christoph2/pyxcp written in python

[RainerZ]

Hi aaroniza0,

I recommend to use the branch V6_WorkInProgress. It is the upcoming newer version to be released soon. Will be easier for us to support and we are interested in feedback.

Regards Rainer

From: aaroniza0 @.> Sent: Wednesday, August 30, 2023 3:36 PM To: vectorgrp/XCPlite @.> Cc: Subscribed @.***> Subject: [vectorgrp/XCPlite] Help (Issue #38)

Hello,

I'm a senior computer engineering student working on my senior design project at the moment, my project requires reading some hardware through ethernet and the hardware lists xcp on udp/ip as the communication protocol.

My team has to use a raspberry pi, would this program achieve this and work on the pi? If so, how would I install it on my raspberry pi?

Also, would it be possible to use python to read the values being read from the hardware?

Thanks,

aaroniza0

— Reply to this email directly, view it on GitHubhttps://github.com/vectorgrp/XCPlite/issues/38, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABAJOU436RPNHVBFS7RQFL3XX46VTANCNFSM6AAAAAA4ERHLA4. You are receiving this because you are subscribed to this thread.Message ID: @.@.>>

[aaroniza0]

I’m looking at the c++ demo in the V6_WorkInProgress but having trouble figuring out how I would collect data collected by the xcp slave, any ideas to accomplish this? This project I’m working on just needs to pull data from an xcp slave so i don’t think it’s too complicated to do, I’ve just never done this before.