vdsm
pass-through disk not working
Operating system
Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye
Description
Unable to pass-through disk. The disk is not visible by the DSM at all.
Docker compose
services: dsm: container_name: dsm image: vdsm/virtual-dsm environment: DISK_SIZE: "32G" RAM_SIZE: "4G" CPU_CORES: "4" GPU: "Y" devices: - /dev/kvm - /dev/dri - /dev/sdc:/dev/sdb cap_add: - NET_ADMIN ports: - 5000:5000 - 2222:22 volumes: - /var/dsm:/storage stop_grace_period: 2m
Docker log
[ 1.685207] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21 [ 1.686617] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 [ 1.687833] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23 [ 1.689041] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20 [ 1.700448] scsi host6: Virtio SCSI HBA [ 1.702572] scsi 6:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 1.703600] sd 6:0:0:0: [synoboot] 225280 512-byte logical blocks: (115 MB/110 MiB) [ 1.704512] sd 6:0:0:0: [synoboot] Write Protect is off [ 1.705047] sd 6:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.706743] synoboot: synoboot1 synoboot2 [ 1.719566] sd 6:0:0:0: [synoboot] Attached SCSI disk [ 1.843643] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns [ 4.672073] scsi host7: Virtio SCSI HBA [ 4.676313] scsi 7:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 4.677373] sd 7:0:0:0: [sda] 9676832 512-byte logical blocks: (4.95 GB/4.61 GiB) [ 4.678236] sd 7:0:0:0: [sda] Write Protect is off [ 4.678733] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.680075] sda: sda1 sda2 [ 4.680485] sd 7:0:0:0: [sda] Attached SCSI disk [ 7.649307] scsi host8: Virtio SCSI HBA [ 7.651376] scsi 8:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 7.652358] sd 8:0:0:0: [sdb] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB) [ 7.653210] sd 8:0:0:0: [sdb] Write Protect is off [ 7.653603] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.655767] sdb: sdb1 [ 7.712159] sd 8:0:0:0: [sdb] Attached SCSI disk
Screenshots (optional)
No response
I dont know why you did /dev/sdc:/dev/sdb because that is totally not how its described in the readme. You should do something like /dev/sdc:/disk2
