vBrolin

No worries, just wanted it to be documentet in case someone else had the same issue. Enabling debugging, I'll post it all here. [12:35:13][I][app:102]: ESPHome version 2023.9.3 compiled on Oct...

I guess it got in there while changing out the codes multiply times. I've removed it now but it still showing the same messages.

Messages after the change. 10:19:31 | [D] | [switch:012] | 'p1_cts' Turning ON. 10:19:31 | [D] | [switch:055] | 'p1_cts': Sending state ON 10:19:31 | [D] | [switch:012] | 'status_led'...

Could this be useful? https://www.skekraft.se/wp-content/uploads/2021/03/Aidon_Feature_Description_RJ12_HAN_Interface_EN.pdf It has example data at the last page. In this project, which I guess share a lot with this project. https://github.com/psvanstrom/esphome-p1reader This is in the...

This reader is 3 hours away from home in a cabin, so it's a bad project for testing. I might just buy something off the shelf, or just skip measuring...

Back at the cabin where the reader is. Talked to the power company, and they claim the reader is an upgraded Aidon running the newest software, configured to use: EFS2:...

I think I'll go the simple route and just buy a HomeWizard P1 reader and see if that works. sön 17 dec. 2023 kl. 20:25 skrev Johnny Johansson ***@***.*** >:...

Interesting, could try having a look at this to see if your guess is right. sön 17 dec. 2023 kl. 20:36 skrev Johnny Johansson ***@***.*** >: > I just remembered...

I got the same issue on a new installation. As soon as I change the target temperature, the actual temp change to the same, while the app still shows the...