imou_life
imou_life copied to clipboard
user2684
Feedbacks on supported models
This issue help collecting feedbacks on which Imou models have been tested and which one is working or not with the integration. The feedbacks are then summarized in https://github.com/user2684/imou_life/wiki/Supported-models.
Please comment by adding the model nome, model id, if it is working or note and any additional comment which may help other users. Thanks!
Thanks @user2684 I can confirm I just installed and tested on: Device info Imou Bullet 2C 4MP (IPC-F42) by Imou Firmware: 2.800.0000000.13.R.221108 Hardware: 8H01A38PBVD53ED
Updated the original message summarizing what we get so far. Thanks for the feedbacks guys!
@user2684 the doorbells DB11/60/61 have limited support. I am using the webhook events with my DB11 to detect motion and when someone pushes the ring button. The newer doorbells 60/61 also have native Dahua API support however the Imou webhook events should work too.
Turrent IPC-T22E working with some bugs, the stream in hd via browser freezes and in sd works just fine.
I got access (shared by a friend) to a IPC-S21FE, I get only HD video but it isn't showing
@arandax do you mean both SD and HD video are not working? What about the other functionalities and the switches? Thx!
Just replied in the issue I've opened. https://github.com/user2684/imou_life/issues/70#top
Hi all, for info, I've added a dedicated wiki page for hosting the list of supported/ tested model at https://github.com/user2684/imou_life/wiki/Supported-models which will be eventually linked in the README of the next release.
This issue will stay open indefinitely to still collect comments which will be then added to that table. In this way updating the list of supported models can be handled independently from new releases of the integration.
@tapsystem thanks, added to https://github.com/user2684/imou_life/wiki/Supported-models
I have IPC-S7X-10M0WED, IPC-S42FP-D, IPC-S41FP, IPC-S2X-10M0WED. Motion detection is not available on these camera models. Can you add it to Imou Life? Thank you in advance !
The vaccum cleaner L11 Pro Max cannot be found. And i dont know where to find the device id.
@DuongAnhToan are all of those the same models or different? Do all of them come without motion detection sensor in HA? is everything else working? Thanks @Jobba7 No vacuum cleaner are supported as of now since they use a completely different set of (undocumented) api.
Is the integration planned or is there another way to connect the vacuum cleaner to HA? @user2684
@Jobba7 not at this time since the API used by vacuum cleaners are different and not documented afaik. Thx
Bought a Bullet 3c 2k. Recognized, something works, something not. I can reboot, I can turn on or off the status led, seems works IR lighting mode Fail siren activation, fail activation of human detection, fail refresh alarm. Seems No reaction on motion (probably due to a missing push notification switch). No video stream (entity still here but no video). Unfortunately also motion detection through onvif not works (in app obviously works with notifications), video streams works through onvif. Can I help to add Support for the bullet 3c (I'll ask as a separate thread here in issues)?
Model not supported Imou Cruiser Dual ( IPC-S7X-10M0WED ) Firmware: 2.800.0000000.22.R.240524 Hardware: 12E11ADPSFBD915
Live video streaming only go2rtc
@Adam7411 Hi, I see most of the sensors seem to work but the live video streaming, is it correct? If this is this case I'd add it as partially supported. Thanks
live video streaming not works :( please give me some help on how to fix it
Hello can you also ad the Cruiser IPC-S22F That would be so kind Thank you for helping
Imou RV-L11-A Firmware: 0.4.50 Serial: LCL25592022100002946 Link: https://www.imoulife.com/de/product/detail/rv-l11-a
Not working - can you please add this device? This would be so nice :)
Hi @IronSim vacuum cleaners will likely never be supported by this integration unfortunately, unless APIs will be published (https://github.com/user2684/imou_life/wiki/I-would-like-to-have-support-for-this-new-model)
hi @user2684 - this is very sad, but thank you very much for the information
Am Sa., 3. Aug. 2024 um 09:05 Uhr schrieb user2684 @.***
:
Hi @IronSim https://github.com/IronSim vacuum cleaners will likely never be supported by this integration unfortunately, unless APIs will be published ( https://github.com/user2684/imou_life/wiki/I-would-like-to-have-support-for-this-new-model )
— Reply to this email directly, view it on GitHub https://github.com/user2684/imou_life/issues/53#issuecomment-2266587248, or unsubscribe https://github.com/notifications/unsubscribe-auth/AWQQVGUJ3VFDJFS22OANSU3ZPR6KDAVCNFSM6AAAAAAVPPFJCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRWGU4DOMRUHA . You are receiving this because you were mentioned.Message ID: @.***>
-- Liebe Grüße
Simon
Mit freundlichen Grüßen
Simon Hörmann
Closing the issue, if you have additional feedbacks on supported models feel free to report it still here, even if it is closed. Thanks
hi, can you help me with this camera with light. https://www.imou.com/it/product/detail/bulb-cam IPC-S6D-3M0WEB da Imou Firmware: 2.801.0000000.1.R.240815 thanks
