FEM_Magnetics_Toolbox
FEM_Magnetics_Toolbox copied to clipboard
upb-lea
An Open-Source FEM Magnetics Toolbox for Power Electronic Magnetic Components
**Describe the bug** The n winding transformer with split window, the geometry drawing is created but the FEM simulation gives error. **To Reproduce** # i have attached the code import...
The documentation mentions that only 2D rotationally symmetric shape could be used. Is it posibile to add 2D planner (in x-y plane) of the core?
When winding window rasterization is enabled and the insulations are disabled the points created from the winding window rasterization are not filling the whole winding window (the insulation space is...
When i want to create a model with a rectangular winding i have to specify a thickness parameter. But in VirtualWindingWindow.set_winding() i can specify the WrapParaType to Interpolate so it...
Will it be possible to integrate data from the [OpenmMagnetics ](https://openmagnetics.com/) project directly into the library? So to use a single format for the data and then in case run...
Hi, Is there a class function to calculate the inductance and leakage of a generated model?
**Describe the bug** When running a thermal simulation with the option visualize_before=True and the previous executed electro_magnetic simulation had the option show_results=True the thermal model will be filled with the...
**Describe the bug** The error occurs when two corner air-gaps are simulated simultaneously (one at air_gap_position = 0 and other at air_gap_position = 100 with air_gap_method = "percent" **To Reproduce**...
Simple Method to import BH Curves (and other values/curves) directly from the TDK Material Library tool. - Some coverting is needed - Finally the BH curve shall be placed in...
For single simulation and single core. It works for all materials except custom. Test will fail for advanced_example_inductor_sweep because at a some point the saturation will be detected
