unixko
C F switch
Is there a way to change it to farenheit ? The original heatpump has a property of iscelcius , but it's not included in this current native or classic mode, how to I go about farenheit?
Did you change HA unit system in configuration.yaml ?
homeassistant:
unit_system: imperial
Also please test your IR remote control that what is the lowest and highest temperature number and step size. Then try to update those values in mitsucon.h configuration file. If it works please post your IR remote control picture and your HA climate screenshot for future reference.
So in mitsucon.h I set the low high values in c or f, when unit_system: is imperial
On Sun, Sep 22, 2019, 5:13 AM unixko [email protected] wrote:
Did you change HA unit system in configuration.yaml ?
homeassistant: unit_system: imperial
Also please test your IR remote control that what is the lowest and highest temperature number and step size. Then try to update those values in mitsucon.h configuration file. If it works please post your IR remote control picture and your HA climate screenshot for future reference.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/unixko/MitsuCon/issues/5?email_source=notifications&email_token=ABNS2YSGP7SCR57FSJMKA23QK4ZKBA5CNFSM4IZBPGPKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7JB2XQ#issuecomment-533863774, or mute the thread https://github.com/notifications/unsubscribe-auth/ABNS2YQB7FDZMQHYXUAD6FTQK4ZKBANCNFSM4IZBPGPA .
Yes please set in F like 60-88. I hope HA will handle all C/F conversion and use deterministic unit from value range.
I also have this issue. When used in conjunction with SwiCago's custom components, discovered climate sensors using this repo report in Celsius. It appears that they need to be converted before being sent.
I tested and found that when changing HA Unit System from metric to imperial, other Climate devices can switch unit on the fly but not for MQTT HVAC. That is because MQTT HVAC component doesn't support temperature_unit parameter. Pull request to HA like below is needed.
https://github.com/home-assistant/home-assistant/pull/30602
When MQTT HVAC and MQTT Discovery are supported I will add temperature_unit = TEMP_CELSIUS to MitsuCon code.
@yabuts @kenberland Home Assistant 0.109.0 added support to change unit in MQTT Climate to Fahrenheit. Please try my latest PR https://github.com/unixko/MitsuCon/commit/5650ccb9fa10562699c86ced657005adac915251. Does it work well?
@dzungpv @gysmo38 you may be interested to utilize HA 0.109.0 MQTT HVAC variable temperature_unit and let HA handles all of conversion instead.