Ulf Frisk

Hi, Thanks for contacting me about this. I some time ago looked into this as well but I have two unmet dependencies unfortunately. 1. For PCILeech DMA access on the...

Awesome, and many thanks for this. I'll see to it getting ported. I first have to install Windows on my RPi tho :) As a side note I saw that...

Update, I just released the MemProcFS memory analysis project for Windows 10/11 for ARM64. You'll now be able to analyze memory dump files on your ARM64 Windows 10/11 computer. (Analyzing...

This is working since some time ago. X64 binaries will work just fine with minimal performance impact. Also analyzing ARM64 Windows systems are now supported as well so I'm closing...

I'm going to assume you run the pcileech for Linux coz of the `./`. The FTD3XX.dll is required for Windows only. For Linux you will need to download and build...

The error message indicates you are unable to connect over USB3 to the device. If you have it successfully flashed (VID=0x10ee / PID=0x0666 indicates that) I'm guessing it may be...

@3456668888 please try run `pcileech.exe display -min 0x1000 -device fpga -v -vv` for additional debug output. Also make sure you have the `FTD3XX.dll` alongside pcileech.exe. Please let me know how...

Apologies for the late reply. The most likely cause of this error is due to a bad flash of the FPGA. When powered on is the LED blinking a couple...

@darknessbetz what is your error message if you do: `pcileech.exe display -min 0x1000 -v -device fpga` also are you testing with the default firmware I have for download? If you're...

@darknessbetz you're the 2nd person reporting it stops working after 20 minutes of use or so, the other guy was going to try to put a heat sink on the...