John Whittington

This is old but I looked into it since I've not used continuous scan before. Reading ANT AP14 Continuous Scanning Mode for Asynchronous Topologies, one can RX in broadcast, ack...

Thanks for the work on this but closing as ANT+ device support is added with #76 and this is now out of date.

Fair enough and no need to be sorry, I don't take it personally! Pity you didn't see my PR to comment then, but open to PRs to improve on what...

Since this is seven years old and I use on macOS with Homebrew installed libusb without issue, I'm putting this down to specific environment and closing.

Should help others in this thread but also perhaps the feature in UTM: this can be done with a LaunchAgent. I did the same for Parallels and just adapted it...

The issue sounds similar to https://github.com/Tigge/openant/issues/81 - I've not used a Cospoo stick but it seems the same that a small section of the protocol (and perhaps not used by...

No and it's not how ANT is designed to be used. You could write a software mux by calling `open_channel` and `close_channel` to switch nodes but you'd risk missing data...

For those longingly hoping for the developer keys to come back...I think they have been disabled on a per user request basis (maybe it was being abused). You have to...

Is the question whether there is one or a statement that there is? I would like to remove libudev-sys since it seems to be [unmaintained](https://github.com/dcuddeback/libudev-sys/pull/16). That pull request requires me...

Thanks. udev is only required for the HWDB lookup (for 1:1 with `lsusb` since usb-ids can also be used for this) and device driver lookup. Should it should be quite...