tube_gateways
tube_gateways copied to clipboard
Q: Add a relay module to CC2652P2 based Zigbee to Ethernet/USB Serial Coordinator
Hello there,
i would like to add a one channel relay module to your coordonator. Like this
(https://www.banggood.com/2Pcs-5V-1-Channel-Level-Trigger-Optocoupler-Relay-Module-p-1366337.html?imageAb=1&p=MA240439985285201910&akmClientCountry=HU&cur_warehouse=CN)
Possible to use the ethernet connection pins to connect it? My idea is that solder this type of pin header and use the free pins in WT32-ETH01
Should work. The used pins are defined in the esphome yanks posted here.
Just be aware the custom serial server component has issues on esphome after 2021.09.x. It will not be able to flash the cc2652 module over the network connection.
@tube0013
My plan that i install Tasmota and use that control zigbee TRV-s. Create a rule, that any of TRV is open state >=10% the relay is On. If all of lower than 10%, relay Off.