Todd Stellanova

Sounds like you’re making progress on a design. Agreed the second approach seems more beneficial than the first. I’m unlikely to have time to add features in the next few...

I was wondering about the version currently available via QGroundControl, so I grabbed it from AWS and ran: ``` cat px4flow.px4 | strings ``` This gave the following info: ```...

Yes, I have tried with a variety of other frequencies. I’m currently working around the problem by sampling at 3 MHz (which is adequate in this case).  I just now...

I just now tried with `cs16` and `cf32` output, 4.0 Msps and then 4.000100 Msps and indeed, 4.0 records about half as much data as expected in the allotted time...

FWIW I also briefly tried with the `hackrf` source and do not see this problem. This appears to be an issue with the `plutosdr` source.

Yes, this issue is also exhibited via the GUI. I just now tried recording `cs8` at 4.0 Msps and then 4.000100 Msps, for about 10 seconds (manually timing and clicking...

@carlesfernandez Thanks for the example. I tried that `Acquisition_2S` conf block with the sample ` gps_l2c_m_prn7_5msps.dat` file but got no log output (as far as I could see) indicating successful...

@wkazubski Thanks for the suggestion. I've reduced the number of channels to one with no luck, using a pre-recorded file source. I tried building for extended unit tests and running...

Thanks for the sample config file. I swapped in an RTLSDR and was able to obtain a position fix after about ten minutes. I'm going to close this issue and...