pimd
pimd copied to clipboard
troglobit
PIM-SM/SSM multicast routing for UNIX and Linux
Please implement protocol support MSDP as is currently implemented in FRRouting. https://tools.ietf.org/html/rfc3618
Some routers have support for customizing the SSM group range, for interop and legacy systems this could be very useful: config/ip/pim/> ssm-range Cisco has ip pim ssm {default | range...
We're trying to use pimd to route multicast into and out of a nat'd subnet. We are successfully getting the data into the subnet, through the nat with no issues,...
Hi @troglobit, I'm working with pimd with the following topology: Four networks: n1, n2, n3, n4. n1 is a management LAN. Multicast sources are on n2. n3 is an OpenVPN...
Hi! I have some problems. Perhaps not possible to use this for Telenor IPTV in Norway? I use igmpproxy proxy now. It does this: Source | Destination | Protocol|Length|Info 192.168.xx.xxx...
Hello, I have a question about PIMD in operation. I am currently running PIMD (version 2.3.0) on a linux host machine. I would like to know once the pimd daemon...
In 760dd9d support for the [IP Option Router Alert](https://tools.ietf.org/html/rfc2113) was added. Since not all end devices, or even routers, support¹ Router Alert this may lead to loss of function in...
Hi troglobit, I have the following situation where I'm attempting to get multicast traffic from Client1 to Client2 (or any other client in their respective subnets). ``` +--------------------+ +-------------------------+ |...
Hello, I am seeing issues with mrouted creating the multicast routing cache when SELinux is in enforcing mode. I am sending a multicast video stream from a machine using VLC...
pimd -v 2.3.1 Same RP for both subnets - 10.200.200.20 First run in default table,second run in it's own table. Debug: ``` Virtual Interface Table ==== Vif Local Address Subnet...
