Trouble receiving midi message

[richy486]

Using a Teensy 3.2, I can compile and upload the sketch fine. It goes through the startup animation on the LEDs. I can select a mode with the button. It even remembers the mode when I restart.

I'm trying to use mGB mode. But when sending midi from my computer, using Live, through USB, I don't get any status LED changes (or any sound on my gameboy).

The settings in the Arduino IDE are: Board: "Teensy 3.2 / 3.1" USB Type: "MIDI" CPU Speed: "96 MHz (overclock)" Optimize: "Faster" Keyboard Layout: "US English" Port: "HID=#### MIDI (Teensy 3.2"

I can also see a "Teensy MIDI" in my Audio MIDI Setup on macOS and can see "Teensy MIDI" in Live as a "Midi to" output.

I've used the same pins as in the original code. I updated all the libraries in the Arduino IDE. I tried other USB Types to see if there was some serial debugging info printed.

Here is a picture of my breadboard layout.

I also have an Arduino UNO with a which I can send midi to fine with a USB to DIN 5 cable.

I'm not sure where I have gone wrong, since the start up and mode selection appear to work. Does anybody have any ideas?

[trash80]

Can you try this code version to see if we broke anything recently? I do not have a Teensy 3.2 Aboy currently to test: https://github.com/trash80/Arduinoboy/tree/5db4ed8c620e4db0a6a5803c619055df93d006a6