TomCh

From above (CP/M boot code, part-2): > With mousecard in slot-4 then: > - Z80: read $CFFF ; disable expansion ROM, reset IO SELECT' and reset INTC8ROM > - Z80:...

Quick experiment: remove SSC and put mousecard in slot-2 instead. Card detection at $105D: - 3B8: 01 05 04 04 ; block device, parallel, mouse, internal ROM - 3BC: 00...

Here's what Apple II Oasis says about the CP/M card: > CP/M Card > Z80 microprocessor card. Required to run CP/M OS. (It is not recommended to install Hard Disks,...

I tried to get MAME64 v0.192 working, but I just get this fatal error: > F:\Apple][\Emulators\mame0192>mame64 apple2ep -sl4 mouse -sl5 softcard -sl6 diskiing > bootstrap.bin NOT FOUND (tried in apple2ep...

Try some other CP/M disks from asimov that detect a CP/M card in slot-5 (with a mouse in slot-4): CPM2.2(56k).dsk: - 44K Ver. 2.20B - 'g' from debugger breaks on...

Ah! Thanks @mgcaret that certainly explains things! I think I will add a note about this to the AppleWin help, and then close this issue.

Just to add here that in PR #1160, there was a lot of discussion (and some heated!) about adding a flat look for toolbar buttons.

Re. Observation-1 / "stepping" when in full-screen This is by design (as there's no title bar when in full-screen mode). Re. Observation-2 / "stepping" in Title bar after "g" command...

Hi - if you have suggestions for better help text, then we are happy to receive them. Thanks.

Michael - can I take this?