Patrick EGLOFF

Hi all, I came to this post, looking for some infos about the HX711. I noticed some strange things... On both boards i have (not the Sparkfun but similar), i...

Hi, Same for me with a Bluetooth ELM. Works with other SW . Detected port with this SW is PORT 1, but DDT4ALL only gives me port 3 et 4......

[Troubadix](https://github.com/Troubadix) Did you succeed to build something with VS and PIO ? I'm in the same situation as you. Getting millions of errors. It starts like this: Warning! Ignore unknown...

Did you set the APRS pasword in the sketch ? Without it, it doesn"t seem to work. Same for Wunderground. I also can't get Wunderground to work, despite right settings....

For those interested and having problems with Wunderground upload and BME2280 reading, I've made an update of the 1.1f version : [https://github.com/tk5ep/MiniWXStation/tree/master/V1.1f](https://github.com/tk5ep/MiniWXStation/tree/master/V1.1f)

Try to download my fork at the upper given address that I corrected. Keep me informed, thanks

Hi, I installed the 1.1f in a NodeMCU but didn't get any reading from the BME280. I noticed that the Wire library is NOT initialized in the sketch. I added...

Hi, @lucian0112 Do i understand it correctly that you're using a DOUT pin common to all your 12 HX711 ? I would like to use 4 HX711 using the minimum...

Hi, How do you connect 2 cells to one HX711 ? Never thought about your problem, but i don't see any other way to solve it than summing the 3...

Well, 3 pounds increase for a 10 pounds initial weight is A LOT !! 30 % drift is clearly abnormal. Before trying to correct this by software, you should check...