upsy-desky
upsy-desky copied to clipboard
tjhorner
Make your standing desk smarter
There are many different standing desk brands out there, and most of them use the RJ45 pinout that this project does. However, there are a few that do not! How...
Any possibility of a patch cable to connect to a LogicData Compact controller? https://www.logicdata.net/wp-content/uploads/2017/05/Datasheet_Compact_English-Rev4.pdf
It would be great if it could support LINAK controllers, these are OEMed to many desk manufacturers and used an RJ45 connection. My IKEA desk is LINAK. I will most...
Hi, asking for support for the IKEA's UPPSEL controller seems to be a rebranded JCB36N2 (https://www.jiecang.com/JCB36N2-pd45762211.html) Works partially. I set both uplift and jarvis template. All 4 desk preset works...
I was able to set up the UpsyDesky easily, but the unit would not power on with just the RJ45 from the desk controller box. Once connecting a USB-C, the...
Looks like most of the work is already done: https://github.com/iMicknl/LoctekMotion_IoT I think it would be awesome to have some sort of merge between these projects so that a clean all-in-one...
Hello! I recently received the Upsy desky and would like to try it out on my geekdesk. It looks like pin 3 has 5v and pins 1,5,7,8 all appear to...
Perhaps it uses a different protocol? I cut the controller cable with the RJ50 and spliced in an RJ45 on both cut ends, following the pinouts from https://github.com/tjhorner/upsy-desky/issues/5#issuecomment-1235040100 It seems...
https://updowndesk.com.au/ would be amazing... but I wonder if its just a generic controller. How to tell and report?
I'm working on an integration to control the Upsy Desky using the REST API. And I would like to have up/down hold buttons just like the desk control panel has....
