HDMI2USB-numato-opsis-sample-code

HDMI2USB-numato-opsis-sample-code copied to clipboard

Get the hamsterworks minimal-hdmi working on Opsis board

3

_From @mithro on July 17, 2015 8:1_ _Copied from original issue: mithro/numato-opsis-sample-code#20_

mithro

Get memory working with misoc

2

_From @mithro on July 17, 2015 7:38_ misoc currently doesn't support DDR3 with the Spartan-6. Need to extend the support to include DDR3 and then get working on the Opsis....

mithro

Get the Ethernet working with misoc

3

_From @mithro on July 17, 2015 7:48_ The Ethernet uses the RGMII interface. LiteEth in misoc currently doesn't support RGMII interfaces - see https://github.com/m-labs/misoc/issues/5 for more information. Hence; - [x]...

mithro

Get XAPP593 - "DisplayPort passthru" working on Opsis board

2

_From @mithro on July 17, 2015 7:58_ _Copied from original issue: mithro/numato-opsis-sample-code#15_

mithro

Create code for the FX2 to act as a USB-UART

3

_From @mithro on July 17, 2015 7:30_ The FX2 should be loadable with firmware which makes it appear like a CDC-ACM serial port and is connected to the FPGA. The...

mithro

Figure out if we can support xc3progs as a programmer

1

_From @mithro on July 17, 2015 7:50_ _Copied from original issue: mithro/numato-opsis-sample-code#8_

mithro

Get the hamsterworks dvid-logo working on Opsis board

1

_From @mithro on July 17, 2015 8:1_ _Copied from original issue: mithro/numato-opsis-sample-code#21_

mithro

_From @mithro on July 17, 2015 8:3_ _Copied from original issue: mithro/numato-opsis-sample-code#22_

mithro

Get the hamsterworks minimal-dvi-d working on Opsis board

2

_From @mithro on July 17, 2015 8:0_ _Copied from original issue: mithro/numato-opsis-sample-code#19_

mithro

_From @mithro on July 17, 2015 8:0_ _Copied from original issue: mithro/numato-opsis-sample-code#18_

mithro