Timo Schilling

The reason why it doesn't flash is that the US plug has a different name then the (EU) plug2, shelly-plug-u1 vs shelly-plug2. During the update the name of the current...

@Numbski any updates with your testing?

here is a new build of @rojer commit, please test it, it it works the next release will support PlugUS. ~PlugUS.zip~ Edit: out dated files removed, for newer version see...

`curl -F [email protected] http://shelly.local/update`, you must replace `shelly.local` with the hostname or ip of your Shelly

here is a new build http://rojer.me/files/shelly/misc/shelly-homekit-ShellyPlugUS.zip, now it can be flash like every other shelly too. http://a.b.c.d/ota?url=http://rojer.me/files/shelly/misc/shelly-homekit-ShellyPlugUS.zip

@RaphiePS do you have a Plug US or a Plus Plug US? If you say you have version 0.12 it sounds like a Plus Plug US, the firmware from this...

@RaphiePS There three reasons why yours must be a Plus: 1. the output you posted shows `gen: 2` 2. The current version of non Plus US Plug is 1.x 3....

@gedeyenite If you like to test it, you could simply do it by open this url in your browser http://a.b.c.d/ota?url=http://rojer.me/files/shelly/misc/shelly-homekit-ShellyPlugUS.zip (replace a.b.c.d with the ip of your shelly)

@Numbski @just-inlewis @evanpierre @ryanshuck was someone of you able to test that build? Reminder it's only for the "Plug US" not for the "Plus Plug US".

HomeKit has this "Administrator Only Access", the specs saying the following: > When this mode is enabled, the accessory only accepts administrator access. Maybe it can be used in a...