Tim Abraham

@wlhlm Do you have a PNG image for this as well for the slicer?

Let me take a look at the cad and see if I can come up with an updated trim guide for the bottom.

 So i was able to shift that cutout ≈5mm and that give's enough clearance. Let me work on a new bottom panel drawing and trim tool.  Hers the...

Can you share screenshots of your menuconfig and advanced options please?

I do think that the next rev should add a washer. It will help spread out the load across the more fragile ceramic thermal fuse. Simple and easy protection for...

Nope, the manual is correct. That m4 nut is used as a spacer. You don't actually thread into it but it just acts as a spacer to stand the bed...

this would be a @hartk1213 issues. Does it make sense to make this change?

 Looking at the macros.cfg it looks like it casts al probe locations as "integers" so all decimals are lost. https://github.com/jlas1/Klicky-Probe/blob/765ad4eb885f6e93b530d88aa2ab8d7765d6f33f/Klipper_macros/klicky-macros.cfg#L260-L268

Thanks, let me know what you want me to do for testing. Happy to try and diagnose this issue. I've done visual inspection with no obvious signs of damage and...

## Board Overview Top  ## CM4 Area Top  ## CM4 Overview Bottom  ## USB Hub IC  The USB Hub IC looks suspicious.