devel-nytprof
devel-nytprof copied to clipboard
Published
20 hours ago •
timbunce
timbunce
t/test62-subcaller1.t fails on older perls on Windows
CPANtesters reports indicate that what, before Devel-NYTProf-6.07, was t/test62-subcaller1.t (and what is now t/test62-subcaller1-a.t) can experience test failures on older versions of Strawberry Perl. Here is output from a report generated on a Strawberry Perl 5.14.4 with NYTProf version 6.06.
t/test61-submerge.t .... ok
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=1 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=0 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=1 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=0 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=0 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=1 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=1 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=1 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=1 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=0 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=0 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=0 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=0 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=1 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=0 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# Failed test 'test62-subcaller1.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=1 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 464.
# Structures begin differing at:
# $got->[55] = 'fid_fileinfo 3 [ C:/home/heaven/perl5/lib/perl5/Exporter.pm 3 2 0 0 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
# SUMMARY: Breakdown of test62-subcaller1 test failures by option settings:
# calls: 0 => {FAIL 4}, 1 => {FAIL 8}, 2 => {FAIL 4}
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=1
# Looks like you failed 16 tests of 65.
t/test62-subcaller1.t ..
Dubious, test returned 16 (wstat 4096, 0x1000)
Failed 16/65 subtests
These error reports all appear to be emanating from a single CPANtester installation which first began generating reports when NYTProf was at version 6.05. Reports emanating from the same reporter start to PASS with perl-5.20.3.
The CPANtester has not provided a name, so it will be difficult to follow up on these reports. Other CPANtesters on Windows are reporting PASSes.
Hi @jkeenan,
I am currently preparing a CondaForge package recipe for Devel::NYTProf and also get failures with test 62 (t/test62-subcaller1-a.t) in the (dockerized) build environment of CondaForge's CI pipeline. This is version 6.11 of Devel::NYTProf and Perl v5.32.1. When testing with my system Perl (v5.34.1), t/test62-subcaller1-a.t is skipped and the b variant is run instead (it passes). This is the relevant output, containing some more info about package versions and env variables:
Reloading output folder: /home/conda/staged-recipes/build_artifacts
file:///home/conda/staged-recipes/build_artifact.. 1.2kB @ 11.8MB/s 0.0s
file:///home/conda/staged-recipes/build_artifact.. @ 2.4MB/s 0.2s
Transaction
Prefix: /opt/conda
Updating specs:
- perl[version='>=5.32.1,<5.33.0a0',build=*_perl5]
- perl-text-diff
- libgcc-ng[version='>=12']
- perl-test-differences=0.69
Package Version Build Channel Size
──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
Install:
──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
+ _libgcc_mutex 0.1 conda_forge conda-forge/linux-64 Cached
+ _openmp_mutex 4.5 2_gnu conda-forge/linux-64 Cached
+ libgcc-ng 12.2.0 h65d4601_19 conda-forge/linux-64 Cached
+ libgomp 12.2.0 h65d4601_19 conda-forge/linux-64 Cached
+ libnsl 2.0.0 h7f98852_0 conda-forge/linux-64 Cached
+ perl 5.32.1 2_h7f98852_perl5 conda-forge/linux-64 Cached
+ perl-algorithm-diff 1.201 pl5321hd8ed1ab_0 conda-forge/noarch Cached
+ perl-test-differences 0.69 pl5321ha770c72_0 /home/conda/staged-recipes/build_artifacts/linux-64 Cached
+ perl-text-diff 1.45 pl5321hd8ed1ab_0 conda-forge/noarch Cached
Summary:
Install: 9 packages
Total download: 0 B
──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
## Package Plan ##
environment location: /home/conda/staged-recipes/build_artifacts/perl-devel-nytprof_1666788111982/_build_env
The following NEW packages will be INSTALLED:
_libgcc_mutex: 0.1-conda_forge conda-forge
_openmp_mutex: 4.5-2_gnu conda-forge
binutils_impl_linux-64: 2.39-h6ceecb4_0 conda-forge
binutils_linux-64: 2.39-h5fc0e48_11 conda-forge
gcc_impl_linux-64: 10.4.0-h5231bdf_19 conda-forge
gcc_linux-64: 10.4.0-h9215b83_11 conda-forge
kernel-headers_linux-64: 2.6.32-he073ed8_15 conda-forge
ld_impl_linux-64: 2.39-hc81fddc_0 conda-forge
libgcc-devel_linux-64: 10.4.0-hd38fd1e_19 conda-forge
libgcc-ng: 12.2.0-h65d4601_19 conda-forge
libgomp: 12.2.0-h65d4601_19 conda-forge
libsanitizer: 10.4.0-h5246dfb_19 conda-forge
libstdcxx-ng: 12.2.0-h46fd767_19 conda-forge
make: 4.3-hd18ef5c_1 conda-forge
sysroot_linux-64: 2.12-he073ed8_15 conda-forge
Preparing transaction: ...working... done
Verifying transaction: ...working... done
Executing transaction: ...working... done
Found source in cache: Devel-NYTProf-6.11_bb1eb2065a.tar.gz
INFO:conda_build.source:Found source in cache: Devel-NYTProf-6.11_bb1eb2065a.tar.gz
Extracting download
source tree in: /home/conda/staged-recipes/build_artifacts/perl-devel-nytprof_1666788111982/work
export PREFIX=/home/conda/staged-recipes/build_artifacts/perl-devel-nytprof_1666788111982/_h_env_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_pl
export BUILD_PREFIX=/home/conda/staged-recipes/build_artifacts/perl-devel-nytprof_1666788111982/_build_env
export SRC_DIR=/home/conda/staged-recipes/build_artifacts/perl-devel-nytprof_1666788111982/work
INFO: activate-binutils_linux-64.sh made the following environmental changes:
+ADDR2LINE=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-addr2line
+AR=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-ar
+AS=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-as
+CXXFILT=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-c++filt
+ELFEDIT=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-elfedit
+GPROF=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gprof
+LD_GOLD=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-ld.gold
+LD=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-ld
+NM=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-nm
+OBJCOPY=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-objcopy
+OBJDUMP=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-objdump
+RANLIB=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-ranlib
+READELF=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-readelf
+SIZE=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-size
+STRINGS=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-strings
+STRIP=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-strip
INFO: activate-gcc_linux-64.sh made the following environmental changes:
+build_alias=x86_64-conda-linux-gnu
-BUILD=x86_64-conda_cos6-linux-gnu
+BUILD=x86_64-conda-linux-gnu
+CC_FOR_BUILD=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-cc
+CC=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-cc
+CFLAGS=-march=nocona -mtune=haswell -ftree-vectorize -fPIC -fstack-protector-strong -fno-plt -O2 -ffunction-sections -pipe -isystem $PREFIX/include -fdebug-prefix-map=$SRC_DIR=/usr/local/src/conda/perl-devel-nytprof-6.11 -fdebug-prefix-map=$PREFIX=/usr/local/src/conda-prefix
+CMAKE_ARGS=-DCMAKE_AR=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-ar -DCMAKE_CXX_COMPILER_AR=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc-ar -DCMAKE_C_COMPILER_AR=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc-ar -DCMAKE_RANLIB=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-ranlib -DCMAKE_CXX_COMPILER_RANLIB=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc-ranlib -DCMAKE_C_COMPILER_RANLIB=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc-ranlib -DCMAKE_LINKER=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-ld -DCMAKE_STRIP=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-strip -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY -DCMAKE_FIND_ROOT_PATH=$PREFIX;$BUILD_PREFIX/x86_64-conda-linux-gnu/sysroot -DCMAKE_INSTALL_PREFIX=$PREFIX -DCMAKE_INSTALL_LIBDIR=lib -DCMAKE_PROGRAM_PATH=$BUILD_PREFIX/bin;$PREFIX/bin
+CMAKE_PREFIX_PATH=$PREFIX:$BUILD_PREFIX/x86_64-conda-linux-gnu/sysroot/usr
+CONDA_BUILD_SYSROOT=$BUILD_PREFIX/x86_64-conda-linux-gnu/sysroot
+_CONDA_PYTHON_SYSCONFIGDATA_NAME=_sysconfigdata_x86_64_conda_cos6_linux_gnu
+CONDA_TOOLCHAIN_BUILD=x86_64-conda-linux-gnu
+CONDA_TOOLCHAIN_HOST=x86_64-conda-linux-gnu
+CPPFLAGS=-DNDEBUG -D_FORTIFY_SOURCE=2 -O2 -isystem $PREFIX/include
+CPP=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-cpp
+DEBUG_CFLAGS=-march=nocona -mtune=haswell -ftree-vectorize -fPIC -fstack-protector-all -fno-plt -Og -g -Wall -Wextra -fvar-tracking-assignments -ffunction-sections -pipe -isystem $PREFIX/include -fdebug-prefix-map=$SRC_DIR=/usr/local/src/conda/perl-devel-nytprof-6.11 -fdebug-prefix-map=$PREFIX=/usr/local/src/conda-prefix
+DEBUG_CPPFLAGS=-D_DEBUG -D_FORTIFY_SOURCE=2 -Og -isystem $PREFIX/include
+GCC_AR=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc-ar
+GCC=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc
+GCC_NM=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc-nm
+GCC_RANLIB=$BUILD_PREFIX/bin/x86_64-conda-linux-gnu-gcc-ranlib
+host_alias=x86_64-conda-linux-gnu
+HOST=x86_64-conda-linux-gnu
+LDFLAGS=-Wl,-O2 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags -Wl,--gc-sections -Wl,--allow-shlib-undefined -Wl,-rpath,$PREFIX/lib -Wl,-rpath-link,$PREFIX/lib -L$PREFIX/lib
Looking for header files and functions...
Your perl was compiled with gcc (version 9.4.0), okay.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Devel::NYTProf
Writing MYMETA.yml and MYMETA.json
cp lib/Devel/NYTProf/Test.pm blib/lib/Devel/NYTProf/Test.pm
cp lib/Devel/NYTProf/Core.pm blib/lib/Devel/NYTProf/Core.pm
cp lib/Devel/NYTProf/js/jit/jit-yc.js blib/lib/Devel/NYTProf/js/jit/jit-yc.js
cp lib/Devel/NYTProf/js/style-tablesorter.css blib/lib/Devel/NYTProf/js/style-tablesorter.css
cp lib/Devel/NYTProf/ReadStream.pm blib/lib/Devel/NYTProf/ReadStream.pm
cp lib/Devel/NYTProf/js/bg.png blib/lib/Devel/NYTProf/js/bg.png
cp lib/Devel/NYTProf/FileHandle.pm blib/lib/Devel/NYTProf/FileHandle.pm
cp lib/Devel/NYTProf/js/jquery.tablesorter.min.js blib/lib/Devel/NYTProf/js/jquery.tablesorter.min.js
cp lib/Devel/NYTProf/Util.pm blib/lib/Devel/NYTProf/Util.pm
cp lib/Devel/NYTProf/SubInfo.pm blib/lib/Devel/NYTProf/SubInfo.pm
cp lib/Devel/NYTProf/js/jit/jit.js blib/lib/Devel/NYTProf/js/jit/jit.js
cp lib/Devel/NYTProf/Constants.pm blib/lib/Devel/NYTProf/Constants.pm
cp lib/Devel/NYTProf/Run.pm blib/lib/Devel/NYTProf/Run.pm
cp lib/Devel/NYTProf/js/desc.png blib/lib/Devel/NYTProf/js/desc.png
cp lib/Devel/NYTProf/Apache.pm blib/lib/Devel/NYTProf/Apache.pm
cp lib/Devel/NYTProf/js/jquery-min.js blib/lib/Devel/NYTProf/js/jquery-min.js
cp lib/Devel/NYTProf/js/jit/gradient30.png blib/lib/Devel/NYTProf/js/jit/gradient30.png
cp lib/Devel/NYTProf/js/asc.png blib/lib/Devel/NYTProf/js/asc.png
cp lib/Devel/NYTProf/Data.pm blib/lib/Devel/NYTProf/Data.pm
cp lib/Devel/NYTProf/js/jit/gradient20.png blib/lib/Devel/NYTProf/js/jit/gradient20.png
cp lib/Devel/NYTProf/FileInfo.pm blib/lib/Devel/NYTProf/FileInfo.pm
cp lib/Devel/NYTProf/js/jit/gradient.png blib/lib/Devel/NYTProf/js/jit/gradient.png
cp lib/Devel/NYTProf/js/jit/gradient40.png blib/lib/Devel/NYTProf/js/jit/gradient40.png
cp lib/Devel/NYTProf/Reader.pm blib/lib/Devel/NYTProf/Reader.pm
cp lib/Devel/NYTProf.pm blib/lib/Devel/NYTProf.pm
cp lib/Devel/NYTProf/js/jit/gradient50.png blib/lib/Devel/NYTProf/js/jit/gradient50.png
cp lib/Devel/NYTProf/js/jit/Treemap.css blib/lib/Devel/NYTProf/js/jit/Treemap.css
cp lib/Devel/NYTProf/SubCallInfo.pm blib/lib/Devel/NYTProf/SubCallInfo.pm
cp lib/Devel/NYTProf/js/jit/gradient-cushion1.png blib/lib/Devel/NYTProf/js/jit/gradient-cushion1.png
cp MemoryProfiling.pod blib/lib/Devel/MemoryProfiling.pod
Running Mkbootstrap for NYTProf ()
chmod 644 "NYTProf.bs"
"$PREFIX/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- NYTProf.bs blib/arch/auto/Devel/NYTProf/NYTProf.bs 644
"$PREFIX/bin/perl" "$PREFIX/lib/perl5/core_perl/ExtUtils/xsubpp" -typemap '$PREFIX/lib/perl5/core_perl/ExtUtils/typemap' -typemap '$SRC_DIR/typemap' FileHandle.xs > FileHandle.xsc
mv FileHandle.xsc FileHandle.c
$BUILD_PREFIX/bin/..//bin/x86_64-conda-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -march=nocona -mtune=haswell -ftree-vectorize -fPIC -fstack-protector-strong -fno-plt -O2 -ffunction-sections -pipe -isystem $PREFIX/include -fdebug-prefix-map=/home/conda/feedstock_root/build_artifacts/perl_1645063083032/work=/usr/local/src/conda/perl-5.32.1 -fdebug-prefix-map=$PREFIX=/usr/local/src/conda-prefix -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"6.11\" -DXS_VERSION=\"6.11\" -fPIC --sysroot=$BUILD_PREFIX/bin/..//x86_64-conda-linux-gnu/sysroot "-I$PREFIX/lib/perl5/5.32/core_perl/CORE" -W -Wall -Wpointer-arith -Wbad-function-cast -Wno-comment -Wno-sign-compare -Wno-cast-qual -Wmissing-noreturn -Wno-unused-parameter FileHandle.c
"$PREFIX/bin/perl" "$PREFIX/lib/perl5/core_perl/ExtUtils/xsubpp" -typemap '$PREFIX/lib/perl5/core_perl/ExtUtils/typemap' -typemap '$SRC_DIR/typemap' NYTProf.xs > NYTProf.xsc
mv NYTProf.xsc NYTProf.c
$BUILD_PREFIX/bin/..//bin/x86_64-conda-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -march=nocona -mtune=haswell -ftree-vectorize -fPIC -fstack-protector-strong -fno-plt -O2 -ffunction-sections -pipe -isystem $PREFIX/include -fdebug-prefix-map=/home/conda/feedstock_root/build_artifacts/perl_1645063083032/work=/usr/local/src/conda/perl-5.32.1 -fdebug-prefix-map=$PREFIX=/usr/local/src/conda-prefix -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"6.11\" -DXS_VERSION=\"6.11\" -fPIC --sysroot=$BUILD_PREFIX/bin/..//x86_64-conda-linux-gnu/sysroot "-I$PREFIX/lib/perl5/5.32/core_perl/CORE" -W -Wall -Wpointer-arith -Wbad-function-cast -Wno-comment -Wno-sign-compare -Wno-cast-qual -Wmissing-noreturn -Wno-unused-parameter NYTProf.c
rm -f blib/arch/auto/Devel/NYTProf/NYTProf.so
$BUILD_PREFIX/bin/..//bin/x86_64-conda-linux-gnu-gcc -shared -Wl,-O2 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags -Wl,--gc-sections -Wl,--allow-shlib-undefined -Wl,-rpath,$PREFIX/lib -Wl,-rpath-link,$PREFIX/lib -L$PREFIX/lib --sysroot=$BUILD_PREFIX/bin/..//x86_64-conda-linux-gnu/sysroot -fstack-protector-strong FileHandle.o NYTProf.o -o blib/arch/auto/Devel/NYTProf/NYTProf.so \
\
chmod 755 blib/arch/auto/Devel/NYTProf/NYTProf.so
cp blib/arch/auto/Devel/NYTProf/NYTProf.so blib/lib/Devel/auto/Devel/NYTProf/NYTProf.so
cp bin/flamegraph.pl blib/script/flamegraph.pl
"$PREFIX/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/flamegraph.pl
cp bin/nytprofcalls blib/script/nytprofcalls
"$PREFIX/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/nytprofcalls
cp bin/nytprofcg blib/script/nytprofcg
"$PREFIX/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/nytprofcg
cp bin/nytprofcsv blib/script/nytprofcsv
"$PREFIX/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/nytprofcsv
cp bin/nytprofhtml blib/script/nytprofhtml
"$PREFIX/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/nytprofhtml
cp bin/nytprofmerge blib/script/nytprofmerge
"$PREFIX/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/nytprofmerge
cp bin/nytprofpf blib/script/nytprofpf
"$PREFIX/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/nytprofpf
Manifying 6 pod documents
Manifying 9 pod documents
"$PREFIX/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- NYTProf.bs blib/arch/auto/Devel/NYTProf/NYTProf.bs 644
cp blib/arch/auto/Devel/NYTProf/NYTProf.so blib/lib/Devel/auto/Devel/NYTProf/NYTProf.so
PERL_DL_NONLAZY=1 "$PREFIX/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Devel::NYTProf 6.11 started at Wed Oct 26 12:42:07 2022
# Compression: default level is 0, zlib version 0
# --- Perl 5.032001 Config on x86_64-linux-thread-multi:
# d_gettimeod: define
# d_sysconf: define
t/00-load.t .............. ok
t/10-run.t ............... ok
t/11-reader.t ............ skipped: ./t/nytprof_11-reader.out.txt doesn't work unless NYTP_ZLIB_VERSION is set
t/12-data.t .............. skipped: ./t/nytprof_12-data.out.txt doesn't work unless NYTP_ZLIB_VERSION is set
t/13-fileinfo.t .......... skipped: ./t/nytprof_13-data.out.txt doesn't work unless NYTP_ZLIB_VERSION is set
t/14-subinfo.t ........... skipped: ./t/nytprof_14-subinfo.out.txt doesn't work unless NYTP_ZLIB_VERSION is set
t/22-readstream.t ........ ok
t/30-util.t .............. ok
t/31-env.t ............... ok
t/40-savesrc.t ........... ok
t/42-global.t ............ ok
t/44-model.t ............. ok
t/50-errno.t ............. ok
t/60-forkdepth.t ......... ok
t/70-subname.t ........... skipped: Sub::Name 0.11 or later required
t/80-version.t ........... ok
t/90-pod.t ............... skipped: NYTPROF_AUTHOR_TESTING only
t/test01.t ............... ok
t/test02.t ............... ok
t/test03.t ............... ok
t/test05.t ............... ok
t/test06.t ............... ok
t/test07.t ............... ok
t/test08.t ............... ok
t/test09.t ............... ok
t/test10.t ............... ok
t/test11.t ............... ok
t/test12.t ............... ok
t/test13.t ............... ok
t/test14.t ............... ok
t/test16.t ............... ok
t/test17-goto.t .......... ok
t/test18-goto2.t ......... ok
t/test20-streval.t ....... ok
t/test21-streval3.t ...... ok
t/test22-strevala.t ...... ok
t/test23-strevall.t ...... ok
t/test24-strevalc.t ...... ok
t/test25-strevalb.t ...... ok
t/test30-fork-0.t ........ ok
t/test40pmc.t ............ ok
t/test50-disable.t ....... ok
t/test51-enable.t ........ ok
t/test60-subname.t ....... ok
t/test61-submerge.t ...... ok
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=1 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:16.942701689 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=1 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.043699751 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=1 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.098698695 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=1 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.153697640 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=1 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.172697275 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=0 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.232696124 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=0 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.334694166 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=1 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.402692861 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=1 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.485691268 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=0 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.504690903 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=0 leave=0 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.613688812 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=0 savesrc=1 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.673687660 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=1 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.793685357 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=2 compress=1 leave=0 savesrc=1 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.858684110 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=0 compress=0 leave=0 savesrc=0 slowops=2 start=init use_db_sub=0'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:17.985681672 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# Failed test 'test62-subcaller1-a.rdt match generated profile data for blocks=1 calls=1 compress=1 leave=0 savesrc=0 slowops=2 start=init use_db_sub=1'
# at t/lib/NYTProfTest.pm line 468.
# Structures begin differing at:
# $got->[55] = 'fid_line_time 1 4 [ 0 1 ]'
# $expected->[55] = 'fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]'
--- test62-subcaller1-a.rdt 2021-09-11 15:50:48.000000000 +0000
+++ test62-subcaller1-a.rdt_new 2022-10-26 12:43:18.010681192 +0000
@@ -53,7 +53,6 @@
fid_fileinfo 1 call 24 main::sub4 [ 2 0 0 0 0 0 0 main::RUNTIME ]
fid_fileinfo 2 [ Devel/NYTProf/Test.pm 2 2 0 0 ]
fid_fileinfo 2 sub Devel::NYTProf::Test::example_sub 13-13
-fid_fileinfo 3 [ Exporter.pm 3 2 0 0 ]
fid_line_time 1 4 [ 0 1 ]
fid_line_time 1 5 [ 0 2 ]
fid_line_time 1 9 [ 0 1 ]
# SUMMARY: Breakdown of test62-subcaller1-a test failures by option settings:
# calls: 0 => {FAIL 4}, 1 => {FAIL 8}, 2 => {FAIL 4}
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=0:compress=0:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=0:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=1:compress=1:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=0:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1-a.out:leave=0:savesrc=1:slowops=2:start=init:use_db_sub=1
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=0
# FAILED with blocks=1:calls=2:compress=1:file=nytprof_test62-subcaller1-a.out:leave=1:savesrc=1:slowops=2:start=init:use_db_sub=1
# Looks like you failed 16 tests of 65.
t/test62-subcaller1-a.t ..
Dubious, test returned 16 (wstat 4096, 0x1000)
Failed 16/65 subtests
t/test62-subcaller1-b.t .. skipped: needs perl >= 5.33.3 (see t/test62-subcaller1-a)
t/test62-tie-a.t ......... skipped: needs perl < 5.21.1 (see t/test62-tie-b.t)
t/test62-tie-b.t ......... ok
t/test70-subexcl.t ....... ok
t/test80-recurs.t ........ ok
t/test81-swash.t ......... ok
t/test82-version.t ....... ok
t/test90-strsubref.t ..... ok
# Tests ended at Wed Oct 26 12:43:48 2022
t/zzz.t .................. ok
Test Summary Report
-------------------
t/test62-subcaller1-a.t (Wstat: 4096 Tests: 65 Failed: 16)
Failed tests: 3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43
47, 51, 55, 59, 63
Non-zero exit status: 16
Files=55, Tests=4736, 101 wallclock secs ( 0.73 usr 0.12 sys + 35.06 cusr 8.03 csys = 43.94 CPU)
Result: FAIL
Failed 1/55 test programs. 16/4736 subtests failed.
make: *** [Makefile:1283: test_dynamic] Error 255
As a side note, on my system Perl, t/12-data.t fails with the following error:
t/12-data.t .............. 1/?
# Failed test 'captured exception for file not found'
# at t/12-data.t line 247.
# ''
# doesn't match '(?^:Devel::NYTProf::new\(\) could not locate file for processing)'
# Looks like you failed 1 test of 79.
t/12-data.t .............. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/79 subtests
(less 3 skipped subtests: 75 okay)
If I can do anything to help find the cause of this issue, please let me know!
Hi @jkeenan,
I am currently preparing a CondaForge package recipe for
Devel::NYTProfand also get failures with test 62 (t/test62-subcaller1-a.t) in the (dockerized) build environment of CondaForge's CI pipeline. This is version 6.11 ofDevel::NYTProfand Perl v5.32.1. When testing with my system Perl (v5.34.1),t/test62-subcaller1-a.tis skipped and the b variant is run instead (it passes). This is the relevant output, containing some more info about package versions and env variables:
I'm at a loss as to how to respond to this. I don't know what CondaForge is. I am aware of Docker but don't use it myself and I generally consider it outside of my remit to debug failures there that are not occuring outside of Docker.
In this and other bug tickets we've discussed the Devel-NYTProf test suite's hypersensitivity to small changes in one's environment. By that we mean that the test suite is chock full of comparisons between a test run and a pre-computed corpus of data. With small changes in one's environment -- and I suspect changes due to Docker would be non-small -- you get output from the test run that is different from the corpus (and is therefore considered a test failure) without necessarily being wrong.
(Indeed, the only reason I am involved in Devel-NYTProf maintenance at all is that changes in the Perl 5 core distribution sometimes trigger failures in Devel-NYTProf's test suite.)
[snip] If I can do anything to help find the cause of this issue, please let me know!
The only thing I can suggest is to run the failing test file manually (i.e., outside your CI pipeline) and examine the results for plausibility. If the results are plausible, then simply skip the file within the pipeline.
Hey @jkeenan,
Some background on CondaForge: it is is a general-purpose package repository for the package manager Conda, which allows users to install arbitrary versions of a software into various virtual environments among other programs, and to activate, deactivate, and manage these environments and so on. This is useful if you need multiple versions of the same software, or if you want to provide a defined working environment to other people or for another computer, e.g. to reproduce scientific results.
The purpose of my report was merely to inform you that this issue with the test exists in certain environments, and to provide some more information that may help to identify the component of the test suite that suffers from this hypersensitivy, as you call it. I do not expect you to provide personal support for my very specific use case, I was just trying to help. If I can do anything to support you in that matter, please let me know.
Hey @jkeenan,
Some background on CondaForge: it is is a general-purpose package repository for the package manager Conda, which allows users to install arbitrary versions of a software into various virtual environments among other programs, and to activate, deactivate, and manage these environments and so on. This is useful if you need multiple versions of the same software, or if you want to provide a defined working environment to other people or for another computer, e.g. to reproduce scientific results.
The purpose of my report was merely to inform you that this issue with the test exists in certain environments, and to provide some more information that may help to identify the component of the test suite that suffers from this hypersensitivity, as you call it. I do not expect you to provide personal support for my very specific use case, I was just trying to help. If I can do anything to support you in that matter, please let me know.
Thanks very much for taking the time to provide your original report and this response.