MicrowireEEPROM

MicrowireEEPROM copied to clipboard

Reading S 93C76 A : Good Waveform, Incomplete Serial Output

1

i used tim's library to create a UNO sketch to read a blank new 512 word x 16-bit eeprom (all memory registers come filled with 0xFFFF), so i used pagesize...

kenny56

Bug: writeEnable doesn't work with Adress widths greater than 8 bits.

4

An 93LC86C EEPROM has an address width of 10 or 11 bits depending upon configuration. Further the writeEnable command expects two 1's as the MSB of data in combination with...

MarkGen

Reading 16 adw

1

It does not read 16 ADW

Jimmy062006

Adjust send_opcode() timing to improve relibility of enable timing

1

When using a 93LC86C EEPROM the datasheet references critical timing of the start command. **"Note: When preparing to transmit an instruction, either the CLK or DI signal levels must be...

MarkGen