tilldroemmer

@edmunds99 have you been able to fix this problem? I'm currently trying to establish a connection between to USRP B210 via srsRANProject using a open5GS core and cant get my...

sorry for the confusion, the cpu load was from the wrong testbed. I will upload the load of the correct one as fast as possible

Hi @pgawlowicz I am now at the respective setup and meassured the load. I also attached the specs of the Computers   [specsUE.txt](https://github.com/srsran/srsRAN_Project/files/14570214/specsUE.txt) [specsgNB.txt](https://github.com/srsran/srsRAN_Project/files/14570208/specsgNB.txt)

Thank you so much for the fast response gNB  UE  Here is a screenshot of the UE while starting 

[2401_srsue.conf.txt](https://github.com/srsran/srsRAN_Project/files/14570827/2401_srsue.conf.txt) [gnbv2.yaml.txt](https://github.com/srsran/srsRAN_Project/files/14570875/gnbv2.yaml.txt)

i was unsure about the coreset parameter in the 5MHz conifg

We did run it with an external clock, but only with the 10MHz or 20MHz config. We will try it with different gains.

Thank you for the recommendation @mohmd-abzd, I will try it soon. you are also using a raspberry Pi? Or do you mean similar regarding the USRPs?

no updates yet, I will remove to the setup tomorrow. we already tried different gains in steps of 5, but I can try again. I will also grab more logs...

I am trying the different gains on the devices and generating logs right now. I just checked the first logs and I do not understand the way the gains on...