More pcm chips support

[Ultraprogramer]

This is probably kinda that a duplicate of #14 but instead i am requesting other chips.

• [ ] Nec UPD7759 (1 adpcm channel)
• [x] Oki M6258 (1 adpcm channel)
• [x] Seta X1-010 (16 wavetable/pcm channels)
• [ ] Irem GA-20 (4 pcm channels)
• [ ] Konami K053260 (4 pcm/adpcm channels)
• [ ] Konami K054539 (8 pcm channels)
• [ ] Namco C140 (24 pcm channels)
• [ ] Namco C352 (32 pcm channels)
• [ ] ES5503/5506 (32 pcm channels as well) [ES550 is currently being done on a separated pr]
• [ ] C219 (16 pcm channels)
• [ ] OPL4 (18 fm channels + 24 pcm channels) [OPL4 and multipcm are currently being done on a separated pr]
• [ ] RF5C400 (32 pcm channels)
• [x] YMZ280B (8 pcm/adpcm channels)
• [x] PPZ8 (8 8-bit 44.1 khz software mixed channels)
• [x] SB PCM (ditto perhaps it has a lower rate)

[freq-mod]

I would like to request Konami K053260 - one of thousands of YM2151 PCM companions, used in some later Konami arcades. More info: https://vgmrips.net/wiki/Konami_K053260

[Ultraprogramer]

I added it to the list.

[The789Guy]

I would like to request the Nintendo (Sony?) S-SMP chip - the sound chip for the SNES.

[Ultraprogramer]

The sony s-smp chip is already planned for the 0.6 release.

[The789Guy]

Oh. okay.

[IceDragonDee]

According to Wikipedia (so take this with a grain of salt), Soundblaster uses ADPCM compression and, on 1.0 and 1.5, plays back 8-bit mono samples at up to 23khz. 2.0 brings it up to 44.1 and Pro allows for stereo samples, though only at 22.05khz when in stereo.

[freq-mod]

irem ga20 is being worked on. (#787)

[Ultraprogramer]

irem ga20 is being worked on. (#787)

Ok.

[tildearrow]

that will close this issue

No, it won't

[tildearrow]

What? It's not over yet!