Tuomas Kuosmanen

I have now slightly adjusted images for mega, uno, nano, pro micro and mega pro (mini):  @DocMoebiuz I can make a pull request to Connector, should these live next...

Depending on the order you merge, config references with duplicated GUIDs can break both ways. But I agree, the check needs to happen before the merge. It is a pretty...

One use case is to get a 3d printer shield (like RAMPS 1.4) for driving steppers, because those are designed for that, and are widely available at cheap price. I...

So I was looking at the firmware source and it appears that the firmware already supports "step + direction" driver interface, if pins 1 and 2 are the same, as...

I agree that "Warn" might be a bit redundant - I dont know what would fit there - maybe if we had some kind of deprecation scheme on hubhop when...

I think it would be a good compromise to disable (gray out) the input or output configuration part when the config item is orphaned or unassigned to a pin. Once...

Two things: 1. You dont need to flash. While this is not a lot better, you can select "wrong" pins, select another pin config, and select the one you are...

Additional thought is an "auto-free" mode where the servo only "engages" when it moves to a new position, and then frees itself automatically. This would of course not work for...

Actually, you could also compare the commanded servo position with the potentiometer feedback (actual position), and disconnect autopilot for example if the difference is large enough. The comparison etc can...

Or we just let the user choose event type without selecting a device yet? This would make it easier to share config files as examples too, currently it is really...