tiltbridge
tiltbridge copied to clipboard
thorrak
Tilt Hydrometer to WiFi Bridge
E.g. as it is done with tilt apps: ``` 2/6/2024, 17:47:02 Received 2.0 seconds ago ``` Benefit: Immediate feedback on whether the tilt data is being received promptly.
Certain data senders, including Grainfather, Brewfather, Brewers Friend, and Taplistio force the use of Fahrenheit even though Celsius is available.
If the additions are to be made, then it would probably also be advisable to set the "unique_id" as recommended, wouldn't it? - https://www.home-assistant.io/faq/unique_id/ - https://developers.home-assistant.io/docs/entity_registry_index/ _Originally posted by @fkroepfl...
Reported by postalbunny via PM on HBT: ``` {"Color":"Orange","timeStamp":1839,"fermunits":"SG","SG":"1.0260","Temp":"74.0","tempunits":"F"} {"Color":"Orange","timeStamp":1869,"fermunits":"SG","SG":"1.0260","Temp":"74.0","tempunits":"F"} {"Color":"Orange","timeStamp":1899,"fermunits":"SG","SG":"1.0260","Temp":"74.0","tempunits":"F"} {"Color":"Orange","timeStamp":1930,"fermunits":"SG","SG":"1.0260","Temp":"74.0","tempunits":"F"} ``` > I think this is actually a count-up from power on and that we're not really tracking...
Reference: /settings/#tiltbridge Getting used to other units of measurement is not quite so wild, but if you are working with Plato, for example, it is convenient to have the correct...
Currently, if a send fails, the failure cause is discarded silently. It would be very helpful to instead log/track it somewhere that could be displayed to the user, so he/she...
Would you consider adding an option to display a calculated plato and/or brix value in lieu of SG? I'm using Tb to push value to Home assistant and I am...
Is it currently possible to copy calibration data from one tiltbridge showing a calibration equation such as below to another using the Add Calibration Point boxes or save it to...
It would be a great upgrade from the T-display which is supported to this one. The ESP32 S3 is supported in the later version of esptool which I don't believe...
The GSheet sender function currently tries to calculate the local time based on an arbitrary offset the user enters (if they remember to do so. This results in a few...