thor2002ro
thor2002ro
glad it worked
fixed this in 6.7.9 :) was an intentional breakage....
does dmesg show anything at boot? as I searched the pcie switch used in the card is problematic....
reading the patch the quirk fails to renegociate pcie 5gbps but should be stuck in 2.5 and should work..... might be bios related.... as far as I read the ASM2824...
I do think the card is working to some degree because I belive the 10gbps Ethernet is connected to the switch also... are the 2 nvmes showing up after the...
looks fine except the pcie init of the switch ports.... and btw I did some searching and yes the ethernet is connected to the pcie switch also ... so it's...
> Is there a way to set the driver for an individual line ? As both show using pcieport instead of nvme > > [1b21:2824] 02:04.0 PCI bridge: ASMedia Technology...
you know you can look at the source in this git right ? where is it disabled ? "broken device, retraining non-functional downstream link at 2.5GT/s\n" is from the patch...
so wait.... let me get this straight... with the different type of ssd it works? this is getting weird if so... means the might be something wrong with the ssd's...
could be a lot of factors..... but mostly it depends how the nvmes negotiate pcie speeds since the switch has problems with pcie speeds and jiggles them around the controller...