MQTT-Explorer
MQTT-Explorer copied to clipboard
thomasnordquist
MQTT Explorer not Finding any devices
I have a Windows 11 Laptop with Virtualbox installed I installed a VM HA (Home Assistant) It is running with a static ip address 10.2.1.107
I login to Home Assist Went to add on and added ESPHONE and EMQX On ESPHOMEI have two devices discovered. I can visit the devices and control them no problem. The devices are on the same network as the laptop. US V2 Plug for ESPhome PG03V2-US16A-ESP-2-LA
I also am running JMRI and the same laptop. In JMRI Lights table I added the two devises
The lights do not turn off or on from JMRI
So someone told me about MQTT Explorer so I downloaded. 4.0.1 beta and installed I was able to connect to the Home Assistant.
Used the broker username and password,
In EMQX I see the MQTT Explorer is connected.
But in MQTT I do not see any devices showing up.
All this is on the same laptop I even turned off the windows firewall .
I looked for logs from MQTT Explorer could not find any.
How can I troubleshoot my issue.
Note I found you latest production version 3.5 that's what I am running now.
Thank you
Tom
In case you haven't noticed, the author is away from the project since years. Just telling you in case you expected/hoped for a reply.
From: trgrassijr55 @.> Sent: Sunday, November 5, 2023 3:15 PM To: thomasnordquist/MQTT-Explorer @.> Cc: Subscribed @.***> Subject: [thomasnordquist/MQTT-Explorer] MQTT Explorer not Finding any devices (Issue #743)
I have a Windows 11 Laptop with Virtualbox installed I installed a VM HA (Home Assistant) It is running with a static ip address 10.2.1.107
I login to Home Assist Went to add on and added ESPHONE and EMQX On ESPHOMEI have two devices discovered. I can visit the devices and control them no problem. The devices are on the same network as the laptop. US V2 Plug for ESPhome PG03V2-US16A-ESP-2-LA
I also am running JMRI and the same laptop. In JMRI Lights table I added the two devises
The lights do not turn off or on from JMRI
So someone told me about MQTT Explorer so I downloaded. 4.0.1 beta and installed I was able to connect to the Home Assistant.
Used the broker username and password,
In EMQX I see the MQTT Explorer is connected.
But in MQTT I do not see any devices showing up.
All this is on the same laptop I even turned off the windows firewall .
I looked for logs from MQTT Explorer could not find any.
How can I troubleshoot my issue.
Note I found you latest production version 3.5 that's what I am running now.
Thank you
Tom
— Reply to this email directly, view it on GitHubhttps://github.com/thomasnordquist/MQTT-Explorer/issues/743, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABC675BN6ABSUJCVXKMAAP3YC6NQJAVCNFSM6AAAAAA66M2TKKVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE3TOOBTGIZDMNQ. You are receiving this because you are subscribed to this thread.Message ID: @.***>
