Qucs-RFlayout

A tool to produce layouts from Qucs RF schematic (microstrip only for now)

qucs-schematic.sch -> kicad-layout.kicad_pcb [OK]

                                        -> kicad-module.kicad_mod [OK]

                                        -> pcb-rnd-layout.lht [OK]

                                        -> openEMS-script.m [Beta]

                                        -> gmsh.geo [ASAP]

French documentation here

This software is a part of the Open-RFlab project and relies on the octave-openems-hll library, if you are interrested in contributing or involved in an other somewhat -> openems converter please take a look.

Screenshots

Qucs : schematic.sch

Qucs-RFlayout : preview

Pcbnew : layout.kicad_pcb

Pcbnew : module.kicad_mod

Pcb-rnd : layout.lht

OpenEMS : simulation.m

• Better example : A low pass filter designed, produced and measured by F4HDG. Thanks to him!

• Generated scripts outputs :

  • Touchstone file (.sxp)
  • S parameters (Smith chart and orthogonal)
  • Feed point impedance
  • Feed point VSWR
  • Phase response (wrapped and unwrapped)
  • Phase delay and group delay
  • Azimuth & elevation far field radiation pattern (polar and orthogonal, normalized and in dBi)
  • 3D far field radiation pattern for multiple frequencies (animated .gif)
  • Electric & magnetic fields, current and current density in time domain (visible with Paraview)

• Here is a tutorial.

Installation

Dependencies

• Qucs is needed (even if you want to convert QucsStudio files), be sure it is installed and accessible from your PATH variable.
• OpenEMS scripts dependencies :
  • OpenEMS (octave-openems package available on Debian 10 based distros, octave-openEMS on openSUSE)
  • ImageMagick (packages available on most distros)

Package installation

• For Debian based distributions, a repository is available :

DEBIAN=Debian_10    # Use the underlying Debian version of your Debian-based distro

echo "deb http://download.opensuse.org/repositories/home:/thomaslepoix:/open-rflab/${DEBIAN}/ /" | sudo tee /etc/apt/sources.list.d/home:thomaslepoix:open-rflab.list
curl -fsSL https://download.opensuse.org/repositories/home:thomaslepoix:open-rflab/${DEBIAN}/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/home_thomaslepoix_open-rflab.gpg > /dev/null

sudo apt update
sudo apt install qucsrflayout

• For RPM based distributions and Windows, you can download packages here.

Installation from sources

• Debian way : Take a look on the debian branch.

• Classic way :

The build-time dependencies are the following on Debian, check equivalents on your own (reports are welcome) for non Debian-based distros :

qt5-default, libqt5opengl5-dev, texlive-xetex, fonts-lato

Qucs-RFlayout $

    cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release
    cmake --build build
    sudo cmake --build build --target install

Usage

qucsrflayout -i qucs-schematic.sch -o output-directory -f .output-format

Limitations

• Microstrip only for now, coplanar waveguide ASAP.
• Any other component cannot be converted into a geometric shape of metal by this tool.
• Use one wire to connect only two components ports, use apropriate components to make tees or crosses.
• QucsStudio schematics are supported (2.x versions only) but it is closed source and there are some incompatibilities so please prefer using Qucs. If you really need to work with QucsStudio 3.x, take a look at this converter.

Work in progress... [email protected]