DirectName Sometimes not show the rename fields in dialog

DirectName works great, but sometimes it does not show the rename fields. (about every 10th feature creatuion) See Image I just created feature by feature until it shows this problem. Tab does not work and press enter or esc sets the default fusion naming.

(I'm running newest Fusion and directName on a Macbook. However this problem exist already some time - I would say years - sorry I never reported it)

Nov 12 '25 11:11 m67hoff

This happens to me also. It seems to happen more often when I have a design open that uses a lot of memory or CPU.

Nov 12 '25 12:11 Scott216

Hi, I tried just creating 12 sketches and did not hit the problem. Would you say that it is more likely to happen with certain features?

Also, I just realized that I added a troubleshooting mode in the last version!

Please check the option:

Then open the Text console using Ctrl+Alt+C.

Grab the output just after the problem has happened.

Nov 19 '25 19:11 thomasa88

Hello Thomas,

sorry for the late answer, I was traveling. I will try to provide this "troubleshooting log". I also wasn't able to reproduce it in an empty test design. I don't think its feature type dependent. I mostly notice it a "extrude" - however probably because that is the feature I most use. I activate the trouble mode and console view and will send if its happening again.

Greetings Michael

Nov 23 '25 16:11 m67hoff

Writing the text above, it just happened in my actual design. However this is not a typical one and maybe harder to debug. (Since I was just trying some things with my design and rollback the timeline and created a tangent plane, and also not in the right component) So I suggest to wait until it happens again in "normal use" (extrude).

But here is the log:

2025-11-23 18:09:34.621779 DirectName: Scanning timeline
2025-11-23 18:09:34.624791 DirectName: Timeline scan complete
2025-11-23 18:09:39.197719 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:09:40.689305 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:09:41.816490 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:09:42.653974 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:09:43.713123 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:09:56.617871 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-23 18:10:20.029090 DirectName: Terminated command: BrowserExpandCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:42.341694 DirectName: Terminated command: WorkPlaneTangentToCylinderCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:42.359395 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:44.362490 DirectName: Terminated command: AutoSaveFilesCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:44.545797 DirectName: Scanning timeline
 2025-11-23 18:10:44.551315 DirectName: Timeline scan complete
 2025-11-23 18:10:44.551596 DirectName: Scanning timeline
 2025-11-23 18:10:44.554493 DirectName: Timeline scan complete
 2025-11-23 18:10:44.760150 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component

Nov 23 '25 17:11 m67hoff

 2025-11-23 18:10:20.029090 DirectName: Terminated command: BrowserExpandCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:42.341694 DirectName: Terminated command: WorkPlaneTangentToCylinderCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:42.359395 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:44.362490 DirectName: Terminated command: AutoSaveFilesCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:10:44.545797 DirectName: Scanning timeline
 2025-11-23 18:10:44.551315 DirectName: Timeline scan complete
 2025-11-23 18:10:44.551596 DirectName: Scanning timeline
 2025-11-23 18:10:44.554493 DirectName: Timeline scan complete
 2025-11-23 18:10:44.760150 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-23 18:45:12.112549 DirectName: Terminated command: thomasa88_setFeatureName, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:12.148283 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:23.132847 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-23 18:45:23.141836 DirectName: Terminated command: ActivateEnvironmentCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:23.145220 DirectName: Terminated command: UndoDropDown, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:23.230306 DirectName: Scanning timeline
 2025-11-23 18:45:23.233583 DirectName: Timeline scan complete
 2025-11-23 18:45:25.415604 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-23 18:45:25.460500 DirectName: Terminated command: ActivateEnvironmentCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:25.463964 DirectName: Terminated command: UndoDropDown, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:25.551543 DirectName: Scanning timeline
 2025-11-23 18:45:25.554417 DirectName: Timeline scan complete
 2025-11-23 18:45:28.957124 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-23 18:45:28.967012 DirectName: Terminated command: FusionActivateLocalCompCmd, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:29.088665 DirectName: Scanning timeline
 2025-11-23 18:45:29.091558 DirectName: Timeline scan complete
 2025-11-23 18:45:32.855742 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-23 18:45:40.975886 DirectName: Terminated command: WorkPlaneTangentToCylinderCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:41.001620 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:41.125805 DirectName: Scanning timeline
 2025-11-23 18:45:41.131962 DirectName: Timeline scan complete
 2025-11-23 18:45:41.278945 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-23 18:45:56.554354 DirectName: Terminated command: thomasa88_setFeatureName, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:56.574207 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:58.581570 DirectName: Terminated command: AutoSaveFilesCommand, reason: 1, object: adsk::fusion::Component
 2025-11-23 18:45:58.680940 DirectName: Scanning timeline
 2025-11-23 18:45:58.683820 DirectName: Timeline scan complete

I deleted the new tangent plane & directname feature (undo menu) and created the exact same tangent plane one again. This time DirectName worked. Here the log with the last lines from above. (But as said - lets wait for a more standard occurrence)

Nov 23 '25 17:11 m67hoff

Looking at the logs, I see no difference between the good and the bad case, with regards to the timeline scanning 😓 .

I put in more logging. Would you mind replacing DirectName.py with the below file? It logs more during the scanning. DirectName.py You can find it in "Full path" in the add-ins dialog.

I also saw that the code takes the rollback bar into consideration and it tries to always unwrap timeline groups. Might be interesting to note if the timeline is always rolled back when the problem happens.

Nov 24 '25 18:11 thomasa88

There it is - it took some time until it happened again. (Also Fusion is not my Day Job) But I had it in "normal use".

end of timeline
just plain extrude two profiles (and join to existing body)
no groups in timeline
not a large design (but also not basic)
very simple component
but it in a nested component (however I have also seen it with a plain component tree)
for extrude3 DirectName showed the normal rename dialog for the feature (no body since join to existing) - and was renamed to "clip Kante vorne"
for extrude4 the DirectName is as in the screenshot below (no feature rename possible, its in the timeline as extrude4)

Here is the log from the "more logging" version above (starting with Sketch1 - Extrude3 where it worked ):

 2025-11-27 22:18:24.853212 DirectName: Terminated command: SketchStop, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:18:24.953801 DirectName: Scanning timeline
 2025-11-27 22:18:24.958665 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Sketch1']
 2025-11-27 22:18:24.959727 DirectName: Last new object: Sketch1 at index 107
 2025-11-27 22:18:24.960612 DirectName: Candidate new objects: ['Sketch1']
 2025-11-27 22:18:24.960905 DirectName: Timeline scan complete. To rename: ['Sketch']
 2025-11-27 22:18:25.268782 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:18:53.062010 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite']
 2025-11-27 22:18:53.063676 DirectName: Terminated command: thomasa88_setFeatureName, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:18:53.089644 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:18:55.094119 DirectName: Terminated command: AutoSaveFilesCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:18:55.289671 DirectName: Scanning timeline
 2025-11-27 22:18:55.294346 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite']
 2025-11-27 22:18:55.295606 DirectName: Last new object: Halter oberseite at index 107
 2025-11-27 22:18:55.296455 DirectName: Candidate new objects: []
 2025-11-27 22:18:55.296555 DirectName: Timeline scan complete. To rename: []
 2025-11-27 22:19:01.039612 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:19:03.880405 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:19:27.116712 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:19:27.124709 DirectName: Terminated command: FusionActivateLocalCompCmd, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:19:27.323441 DirectName: Scanning timeline
 2025-11-27 22:19:27.328407 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite']
 2025-11-27 22:19:27.329726 DirectName: Last new object: Halter oberseite at index 107
 2025-11-27 22:19:27.330559 DirectName: Candidate new objects: []
 2025-11-27 22:19:27.330660 DirectName: Timeline scan complete. To rename: []
 2025-11-27 22:20:35.587907 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:20:35.601803 DirectName: Terminated command: FusionActivateLocalCompCmd, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:20:35.757438 DirectName: Scanning timeline
 2025-11-27 22:20:35.762209 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite']
 2025-11-27 22:20:35.763314 DirectName: Last new object: Halter oberseite at index 107
 2025-11-27 22:20:35.764129 DirectName: Candidate new objects: []
 2025-11-27 22:20:35.764218 DirectName: Timeline scan complete. To rename: []
 2025-11-27 22:20:58.435534 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:21:11.252385 DirectName: Terminated command: FitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:23:08.637284 DirectName: Terminated command: Extrude, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:23:08.667024 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:23:08.906190 DirectName: Scanning timeline
 2025-11-27 22:23:08.911319 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', 'Extrude1']
 2025-11-27 22:23:08.912440 DirectName: Last new object: Extrude1 at index 108
 2025-11-27 22:23:08.913302 DirectName: Candidate new objects: ['Extrude1']
 2025-11-27 22:23:08.918313 DirectName: Timeline scan complete. To rename: ['Extrude', 'Extrude Body']
 2025-11-27 22:23:09.099706 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:24:42.551217 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben']
 2025-11-27 22:24:42.552580 DirectName: Terminated command: thomasa88_setFeatureName, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:24:42.578995 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:24:44.585507 DirectName: Terminated command: AutoSaveFilesCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:24:44.832197 DirectName: Scanning timeline
 2025-11-27 22:24:44.836815 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben']
 2025-11-27 22:24:44.837836 DirectName: Last new object:  Clip oben at index 108
 2025-11-27 22:24:44.838670 DirectName: Candidate new objects: []
 2025-11-27 22:24:44.838764 DirectName: Timeline scan complete. To rename: []
 2025-11-27 22:25:44.207418 DirectName: Terminated command: PanCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:26:26.324331 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:26:39.177768 DirectName: Terminated command: Extrude, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:26:39.207388 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:26:39.403414 DirectName: Scanning timeline
 2025-11-27 22:26:39.408501 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben', 'Extrude2']
 2025-11-27 22:26:39.409600 DirectName: Last new object: Extrude2 at index 109
 2025-11-27 22:26:39.410432 DirectName: Candidate new objects: ['Extrude2']
 2025-11-27 22:26:39.410847 DirectName: Timeline scan complete. To rename: ['Extrude']
 2025-11-27 22:26:39.583817 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:26:48.916482 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben', 'Haltenase']
 2025-11-27 22:26:48.919198 DirectName: Terminated command: thomasa88_setFeatureName, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:26:48.954526 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:27:11.799888 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:27:28.551623 DirectName: Terminated command: Extrude, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:27:28.577500 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:27:28.762178 DirectName: Scanning timeline
 2025-11-27 22:27:28.767022 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben', 'Haltenase', 'Extrude3']
 2025-11-27 22:27:28.768135 DirectName: Last new object: Extrude3 at index 110
 2025-11-27 22:27:28.769036 DirectName: Candidate new objects: ['Extrude3']
 2025-11-27 22:27:28.769241 DirectName: Timeline scan complete. To rename: ['Extrude']
 2025-11-27 22:27:28.939755 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:27:42.177567 DirectName: Terminated command: BrowserExpandCmd, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:27:58.608591 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben', 'Haltenase', 'clip Kante vorne']
 2025-11-27 22:27:58.609823 DirectName: Terminated command: thomasa88_setFeatureName, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:27:58.631940 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:28:40.865380 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component
 2025-11-27 22:28:57.373641 DirectName: Terminated command: VisibilityToggleCmd, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:30:16.599226 DirectName: Terminated command: Extrude, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:30:16.623776 DirectName: Terminated command: CommitCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:30:18.630863 DirectName: Terminated command: AutoSaveFilesCommand, reason: 1, object: adsk::fusion::Component
 2025-11-27 22:30:18.885637 DirectName: Scanning timeline
 2025-11-27 22:30:18.890731 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben', 'Haltenase', 'clip Kante vorne', 'Extrude4']
 2025-11-27 22:30:18.891746 DirectName: Last new object: Extrude4 at index 111
 2025-11-27 22:30:18.892586 DirectName: Candidate new objects: ['Extrude4']
 2025-11-27 22:30:18.893001 DirectName: Timeline scan complete. To rename: ['Extrude']
 2025-11-27 22:30:18.893274 DirectName: Scanning timeline
 2025-11-27 22:30:18.898046 DirectName: Timeline: [' Grundkörper 10000100868:1', ' Körper 10000100530:1', 'Base Feature1', ' Kragen DN160 10000100019:1', ' 10000100861_Sleeve 160:1', 'Base Feature1', ' 10000100862_Sleeve 160:1', 'Base Feature1', ' 10000100343_160:1', 'Base Feature1', ' 10000100859_D=158:1', 'Base Feature1', ' Einpressmutter 10000101118:1', 'Base Feature1', ' Einpressmutter 10000101118:2', ' Gewindebolzen 10000102262:1', 'Base Feature1', ' Gewindebolzen 10000102262:2', ' Gewindebolzen 10000102262:3', ' Gewindebolzen 10000102262:4', ' Gitter 10000100863:1', 'Base Feature1', ' Abdeckung 10000100869:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:1', 'Base Feature1', ' Mutter Gitter 10000100560_M 4:2', ' Mutter Gitter 10000100560_M 4:3', ' Mutter Gitter 10000100560_M 4:4', ' Abdeck-Schraube 10000100193:1', 'Base Feature1', ' Abdeck-Schraube 10000100193:2', ' Zehnder Original:1', 'CutPaste Grundkörper 10000100868:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', 'CutPaste Abdeck-Schraube 10000100193:1', 'CutPaste Abdeck-Schraube 10000100193:2', ' Kleinteile:1', 'CutPaste Gewindebolzen 10000102262:4', 'CutPaste Gewindebolzen 10000102262:3', 'CutPaste Gewindebolzen 10000102262:2', 'CutPaste Gewindebolzen 10000102262:1', 'CutPaste Einpressmutter 10000101118:2', 'CutPaste Einpressmutter 10000101118:1', ' Innengitter:1', 'CutPaste Gitter 10000100863:1', 'CutPaste Mutter Gitter 10000100560_M 4:1', 'CutPaste Mutter Gitter 10000100560_M 4:2', 'CutPaste Mutter Gitter 10000100560_M 4:3', 'CutPaste Mutter Gitter 10000100560_M 4:4', ' Abdeckung:1', 'CutPaste Abdeckung 10000100869:1', 'CutPaste Abdeck-Schraube 10000100193:2', 'CutPaste Abdeck-Schraube 10000100193:1', ' Haus:1', 'Original aufecht', 'Sketch_Wand', 'Ex_Wand', ' Abweiser 3dDruck:1', 'Position2', 'Seitenkruve', 'Abweiser Kurve', 'Mitte vertikal', 'Rundung innen', 'Löcher Basis ', 'Cut Basis Löcher', 'Seite', 'cur Seite', 'Seite (1)', 'Del Seite Vorne Unten', 'Split vert 3d print', 'Abrunden seite', ' Abluftrohr:1', 'Pos Abluftrohr', 'Rohr v vorne', 'Mitte hor', 'Mitte vert', 'Rohr', 'Flansch innen', 'Flansch Aussden', 'Oben Tang', 'Draft1', 'Steg innen', 'Steg Aussen', 'cut Steg Flansch', '4 Stege', ' Gehäuse:1', 'Gehäuse', 'Schräg oben', 'Schräg unten', 'Schale Gehäuse', 'Cut Gehäuse Rohröff', 'Flansch Gehäuse', 'Flansch unten Gehäuse', 'Offset Flansch unten Gehäuse', 'Split hor', 'Split vert', 'Fase Flansch', 'Bohungen unten', 'Abstandhalter unten links', 'cut bohung unten', ' Halteklemmen oben:1', 'Halter oberseite', ' Clip oben', 'Haltenase', 'clip Kante vorne', 'Extrude4']
 2025-11-27 22:30:18.899194 DirectName: Last new object: Extrude4 at index 111
 2025-11-27 22:30:18.900020 DirectName: Candidate new objects: []
 2025-11-27 22:30:18.900108 DirectName: Timeline scan complete. To rename: []
 2025-11-27 22:30:19.092135 DirectName: Terminated command: SelectCommand, reason: 4, object: adsk::fusion::Component

I hope this helps.

Additional info:

it seems to me not related where in the timeline (rolledback or at end) I create a feature
I have this since I use (some years now) DirectName 1.2.1
I have a Macbook Pro
it was on x86 and M2 (and all MacOS versions since than)
I never used Fusion & DirectName on Windows

Nov 27 '25 21:11 m67hoff