Skynet3d icon indicating copy to clipboard operation
Skynet3d copied to clipboard

Published 20 hours ago • verified publisher icon thijsk

Z Offset

Open chrigu1981 opened this issue 7 years ago • 3 comments

Hello,

first, thank you for the amazing FW. The only thing i would like to have is, when i level my bed, the increase/decrease steps are 0.25 or -0.25. can you tell me please where to adjust the steps. would like to have a more precise range like 0.01.

thank you for your help christian

chrigu1981 avatar Jan 03 '18 16:01 chrigu1981

I have the same issue. I need to set mine to -1.95 and the firmware only allows increments of 25. Can anyone help me understand how to do this either in the config.h file or in the gcode. Thank you

Imaminer avatar Feb 15 '18 23:02 Imaminer

https://3dprint.wiki/reprap/anet/a8/improvement/autobedleveling

ihortarasuk avatar Feb 15 '18 23:02 ihortarasuk

Hello, I have the same issue, and I have trouble to see how the links you gave solve this ? I can see in the end in the troubleshooting that require to use g-code, but the step : "Move the nozzle down so it is just gripping a piece of standard printer paper" doesn't solve it, we need to know how to reduce the step of the Z-axis, otherwise we aren't able to perform a precise movement through printer interface. Today I got the same issue, the Z axis move of 2.5mm each step I try through printer interface

Jorgininho avatar Jun 14 '18 15:06 Jorgininho