wca-regulations icon indicating copy to clipboard operation
wca-regulations copied to clipboard

Add 4g2 for clock pins

Open Rouxles opened this issue 2 years ago • 6 comments

This one is more of a controversial change, but I'm not fully against it.

Rouxles avatar Oct 25 '22 23:10 Rouxles

I brought this up to a few people and they were in favour of it, however the wording is quite confusing and not strictly accurate if I understand it (since the pins could also be moved by the runner or judge). I haven't thought how else to codify allowing pin misscrambles though.

Randomno avatar Oct 26 '22 10:10 Randomno

Hi! Quick question about this PR...

I'm very in favor of relaxing regulations about clock pin position, so I'm very excited to see this being considered for the 2023 regulations! Though I'm a little confused about this particular proposal, it sounds like it's saying scramblers are allowed to send out pin misscrambles only if they confirm with the Delegate. That's not usually the issue with pins -- scramblers don't knowingly send out pin misscrambles, and if they see an issue they'll fix it rather than asking a Delegate. It's more likely that there are issues while running or lifting the cover.

As a (possibly controversial) alternative, would you consider just dropping Article F, or replacing F2 and F3 with a statement that "the pin position is not considered part of the scramble state, and the competitor is permitted to change the position of pins before the start of the solve"? That would mean that: -The scramble doesn't need to specify a pin position -Standard covers can be used, rather than clock-specific ones -During inspection, the competitor is permitted to set the pin position for their first turn -The competitor can put the puzzle standing, or lying down, but either way they won't be DNFed if the pins change

I think this would be more effective at reducing the challenges of organizing Clock. What do you think?

Thank you!

timreyn avatar Oct 26 '22 17:10 timreyn

I brought this up to a few people and they were in favour of it, however the wording is quite confusing and not strictly accurate if I understand it (since the pins could also be moved by the runner or judge). I haven't thought how else to codify allowing pin misscrambles though.

I agree that it's pretty confusing at the moment, but we'll be coming up with a better wording for this as time passes.

Rouxles avatar Oct 26 '22 17:10 Rouxles

Hi! Quick question about this PR...

I'm very in favor of relaxing regulations about clock pin position, so I'm very excited to see this being considered for the 2023 regulations! Though I'm a little confused about this particular proposal, it sounds like it's saying scramblers are allowed to send out pin misscrambles only if they confirm with the Delegate. That's not usually the issue with pins -- scramblers don't knowingly send out pin misscrambles, and if they see an issue they'll fix it rather than asking a Delegate. It's more likely that there are issues while running or lifting the cover.

As a (possibly controversial) alternative, would you consider just dropping Article F, or replacing F2 and F3 with a statement that "the pin position is not considered part of the scramble state, and the competitor is permitted to change the position of pins before the start of the solve"? That would mean that: -The scramble doesn't need to specify a pin position -Standard covers can be used, rather than clock-specific ones -During inspection, the competitor is permitted to set the pin position for their first turn -The competitor can put the puzzle standing, or lying down, but either way they won't be DNFed if the pins change

I think this would be more effective at reducing the challenges of organizing Clock. What do you think?

Thank you!

We voted internally on allowing competitors to move pins during inspection, and generally speaking on average we were against this change. I think the main issue is that the sound a pin makes can be pretty similar to the sound of a dial turning, so it's pretty possible to turn dials without judges noticing. We did consider this at some point though!

The wording of the proposal right now will be changed - at the moment the intention with these PRs is to get some discussion going initially before the WRC sends out drafts to people

Rouxles avatar Oct 26 '22 17:10 Rouxles

@Rouxles Don't you think what I proposed on slack would be less abrupt? Like, wouldn't it be better to require pins to be correct during scrambling, but to allow results in which, during the transportation or the uncovering of the puzzles, the state of the pins change?

JoaoViniciusSantos avatar Oct 26 '22 20:10 JoaoViniciusSantos

@Rouxles Don't you think what I proposed on slack would be less abrupt? Like, wouldn't it be better to require pins to be correct during scrambling, but to allow results in which, during the transportation or the uncovering of the puzzles, the state of the pins change?

Yes, I agree - I'm going to make a suggestion in this thread fairly soon, but will need to think about wording a bit more first

Rouxles avatar Oct 26 '22 20:10 Rouxles

We voted internally on allowing competitors to move pins during inspection, and generally speaking on average we were against this change. I think the main issue is that the sound a pin makes can be pretty similar to the sound of a dial turning, so it's pretty possible to turn dials without judges noticing. We did consider this at some point though!

It seems like for this sort of scenario to happen the judge would need to be inattentive enough to not see the competitor making turns or grabbing the pins and twisting them. It seems plausible to me that competitors with a judge who has similar levels of inattentiveness could reasonably make moves in inspection/memorization periods of other events. Do you think that it would be significantly easier for a competitor to make moves during the inspection period of clock as opposed to making moves during the inspection/memorization period of other events?

I have already tried out some incredible quiet clocks (in regards to both turning and pins) and if we already have judges with that level of inattentiveness then I believe it is already quite possible for competitors to make moves during inspection. Has the WRC discussed the problem of competitors making moves during inspection and looked into reasonable solutions for it?

Perhaps I am just too much of a fan of the idea of removing article F to simplify the regulations and help competition flow, but I feel like clock is getting a bit of discrimination for being easier to cheat than other events :P

Samuel-Baird avatar Nov 14 '22 00:11 Samuel-Baird

At a recent competition, the competitor demanded resolves for all 5 solves, as the pins got misscrambled when it was carried by the runner and/or put on the solving table by the judge.

When the competition is running at full pace, there can be inattentiveness from the scrambler, runner, judge and a pin misscramble can occur. Making a resolve for such situation just delays the round and adds to the confusion.

I strongly think this proposal should be considered in 2023 regulations.

abunickabhi avatar Dec 23 '22 09:12 abunickabhi