gateway
gateway copied to clipboard
theengs
Bug Install
Hello J'ai installe en docker la passerelle, mais lors d'un reboot, elle se relance pas toute seul je suis obligé de faire ceci pour qu'elle redémarre:
root@docker:~# sudo docker run --rm --network host -e MQTT_HOST=192.168.2.165 -v /var/run/dbus:/var/run/dbus --name TheengsGateway theengs/gateway
J'ai cru comprendre que la passerelle démarre je dois faire ceci
sudo pip3 install TheengsGateway
puis
Then create this systemd service script in /etc/systemd/system/TheengsGateway.service:
et finir par
[Unit]
Description=Theengs Gateway
After=network.target
[Service]
Restart=always
Type=simple
ExecStart=/usr/bin/python3 -m TheengsGateway -H host -u user -p password
[Install]
WantedBy=multi-user.target
sauf que quand je lance la commande
sudo pip3 install TheengsGateway
J'ai l'erreur suivante
___ _ _ _ ____ ____ / _ \ __| |_ __ ___ (_) __| | / ___|___ \ | | | |/ _ | '/ _ | |/ ` | | | __) |
| || | (| | | | () | | (| | | | / /
_/ _,|| ___/||_,| _|__|
Welcome to Armbian Buster with Linux 6.0.13-meson64
System load: 0.20 0.23 0.24 Up time: 1 day Memory usage: 34 % of 1931MB IP: 172.18.0.1 192.168.2.165 CPU temp: 30°C Usage of /: 15% of 29G
[ General system configuration (beta): armbian-config ]
Last login: Thu Jan 19 20:59:41 2023 from 192.168.2.2
root@docker:~# sudo pip3 install TheengsGateway
Collecting TheengsGateway Downloading https://files.pythonhosted.org/packages/1f/7c/53289b5bbd2b6bbc8945 0848d0618a0215b0bd5e0bfab2912f7e2ade0ae5/TheengsGateway-0.7.0.tar.gz (134kB) 100% |████████████████████████████████| 143kB 1.9MB/s Installing build dependencies ... error Complete output from command /usr/bin/python3 -m pip install --ignore-installe d --no-user --prefix /tmp/pip-build-env-zn0x1l9m --no-warn-script-location --no- binary :none: --only-binary :none: -i https://pypi.org/simple -- setuptools cmak e wheel scikit-build ninja: Collecting setuptools Downloading https://files.pythonhosted.org/packages/bd/ef/76cffd20061a0c6512 dad4ba3537314904c6350738b99526c2f48992ff58/setuptools-66.0.0-py3-none-any.whl (1 .3MB) Collecting cmake Downloading https://files.pythonhosted.org/packages/e9/67/3d545c3a706bc427b1 bd2a9108e3986dfc8c1450be0da8149fe591902875/cmake-3.25.0.tar.gz Installing build dependencies: started Installing build dependencies: finished with status 'done' Collecting wheel Using cached https://files.pythonhosted.org/packages/bd/7c/d38a0b30ce22fc26e d7dbc087c6d00851fb3395e9d0dac40bec1f905030c/wheel-0.38.4-py3-none-any.whl Collecting scikit-build Using cached https://files.pythonhosted.org/packages/09/3e/e92b856e9c19a732b 915a63b7023775ad31aede0d7473c79cdea844979d1/scikit_build-0.16.5-py3-none-any.whl Collecting ninja Downloading https://files.pythonhosted.org/packages/f7/69/938374c8ebfeda6838 63b22e936f5d465ac9f5bf42be238504c018123190/ninja-1.11.1.tar.gz Installing build dependencies: started Installing build dependencies: finished with status 'done' Collecting distro (from scikit-build) Using cached https://files.pythonhosted.org/packages/f4/2c/c90a3adaf0ddb70af e193f5ebfb539612af57cffe677c3126be533df3098/distro-1.8.0-py3-none-any.whl Collecting typing-extensions>=3.7; python_version < "3.8" (from scikit-build) Using cached https://files.pythonhosted.org/packages/0b/8e/f1a0a5a76cfef77e1 eb6004cb49e5f8d72634da638420b9ea492ce8305e8/typing_extensions-4.4.0-py3-none-any .whl Collecting packaging (from scikit-build) Using cached https://files.pythonhosted.org/packages/ed/35/a31aed2993e398f6b 09a790a181a7927eb14610ee8bbf02dc14d31677f1c/packaging-23.0-py3-none-any.whl Building wheels for collected packages: cmake, ninja Running setup.py bdist_wheel for cmake: started Running setup.py bdist_wheel for cmake: finished with status 'error' Complete output from command /usr/bin/python3 -u -c "import setuptools, toke nize;file='/tmp/pip-install-1itenkc8/cmake/setup.py';f=getattr(tokenize, 'op en', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile( code, file, 'exec'))" bdist_wheel -d /tmp/pip-wheel-aplg85at --python-tag cp 37: Traceback (most recent call last): File "/tmp/pip-build-env-n2b8y5p7/lib/python3.7/site-packages/skbuild/setu ptools_wrap.py", line 617, in setup cmkr = cmaker.CMaker(cmake_executable) File "/tmp/pip-build-env-n2b8y5p7/lib/python3.7/site-packages/skbuild/cmak er.py", line 151, in init self.cmake_version = get_cmake_version(self.cmake_executable) File "/tmp/pip-build-env-n2b8y5p7/lib/python3.7/site-packages/skbuild/cmak er.py", line 108, in get_cmake_version ) from err
=============================DEBUG ASSISTANCE=========================== ==
If you are seeing a compilation error please try the following steps to
successfully install cmake:
1) Upgrade to the latest pip and try again. This will fix errors for mos t
users. See: https://pip.pypa.io/en/stable/installing/#upgrading-pip
2) If on Linux, with glibc < 2.12, you can set PIP_ONLY_BINARY=cmake in
order to retrieve the last manylinux1 compatible wheel.
3) If on Linux, with glibc < 2.12, you can cap "cmake<3.23" in your
requirements in order to retrieve the last manylinux1 compatible whee l.
4) Open an issue with the debug information that follows at
https://github.com/scikit-build/cmake-python-distributions/issues
Python: 3.7.3
platform: Linux-6.0.13-meson64-aarch64-with-debian-10.13
glibc: glibc 2.28
machine: aarch64
bits: 64
pip: 18.1
setuptools: 66.0.0
scikit-build: 0.16.5
=============================DEBUG ASSISTANCE=========================== ==
Problem with the CMake installation, aborting build. CMake executable is cma ke
----------------------------------------
Failed building wheel for cmake
Running setup.py clean for cmake
Running setup.py bdist_wheel for ninja: started
Running setup.py bdist_wheel for ninja: finished with status 'error'
Complete output from command /usr/bin/python3 -u -c "import setuptools, toke nize;__file__='/tmp/pip-install-1itenkc8/ninja/setup.py';f=getattr(tokenize, 'op en', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile( code, __file__, 'exec'))" bdist_wheel -d /tmp/pip-wheel-jr836sb3 --python-tag cp 37:
Traceback (most recent call last):
File "/tmp/pip-build-env-dwq04nok/lib/python3.7/site-packages/skbuild/setu ptools_wrap.py", line 617, in setup
cmkr = cmaker.CMaker(cmake_executable)
File "/tmp/pip-build-env-dwq04nok/lib/python3.7/site-packages/skbuild/cmak er.py", line 151, in __init__
self.cmake_version = get_cmake_version(self.cmake_executable)
File "/tmp/pip-build-env-dwq04nok/lib/python3.7/site-packages/skbuild/cmak er.py", line 108, in get_cmake_version
) from err
Problem with the CMake installation, aborting build. CMake executable is cma ke
----------------------------------------
Failed building wheel for ninja
Running setup.py clean for ninja
Failed to build cmake ninja Installing collected packages: setuptools, cmake, wheel, distro, typing-extens ions, packaging, scikit-build, ninja Running setup.py install for cmake: started Running setup.py install for cmake: finished with status 'error' Complete output from command /usr/bin/python3 -u -c "import setuptools, to kenize;file='/tmp/pip-install-1itenkc8/cmake/setup.py';f=getattr(tokenize, ' open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compil e(code, file, 'exec'))" install --record /tmp/pip-record-mj8jzmg5/install-re cord.txt --single-version-externally-managed --prefix /tmp/pip-build-env-zn0x1l9 m --compile: /tmp/pip-build-env-n2b8y5p7/lib/python3.7/site-packages/setuptools/command /install.py:37: SetuptoolsDeprecationWarning: setup.py install is deprecated. Us e build and pip and other standards-based tools. setuptools.SetuptoolsDeprecationWarning, Traceback (most recent call last): File "/tmp/pip-build-env-n2b8y5p7/lib/python3.7/site-packages/skbuild/se tuptools_wrap.py", line 617, in setup cmkr = cmaker.CMaker(cmake_executable) File "/tmp/pip-build-env-n2b8y5p7/lib/python3.7/site-packages/skbuild/cm aker.py", line 151, in init self.cmake_version = get_cmake_version(self.cmake_executable) File "/tmp/pip-build-env-n2b8y5p7/lib/python3.7/site-packages/skbuild/cm aker.py", line 108, in get_cmake_version ) from err
=============================DEBUG ASSISTANCE========================= ====
If you are seeing a compilation error please try the following steps t o
successfully install cmake:
1) Upgrade to the latest pip and try again. This will fix errors for m ost
users. See: https://pip.pypa.io/en/stable/installing/#upgrading-pip
2) If on Linux, with glibc < 2.12, you can set PIP_ONLY_BINARY=cmake i n
order to retrieve the last manylinux1 compatible wheel.
3) If on Linux, with glibc < 2.12, you can cap "cmake<3.23" in your
requirements in order to retrieve the last manylinux1 compatible wh eel.
4) Open an issue with the debug information that follows at
https://github.com/scikit-build/cmake-python-distributions/issues
Python: 3.7.3
platform: Linux-6.0.13-meson64-aarch64-with-debian-10.13
glibc: glibc 2.28
machine: aarch64
bits: 64
pip: 18.1
setuptools: 66.0.0
scikit-build: 0.16.5
=============================DEBUG ASSISTANCE========================= ====
Problem with the CMake installation, aborting build. CMake executable is c make
----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pi p-install-1itenkc8/cmake/setup.py';f=getattr(tokenize, 'open', open)(file);c ode=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec' ))" install --record /tmp/pip-record-mj8jzmg5/install-record.txt --single-versio n-externally-managed --prefix /tmp/pip-build-env-zn0x1l9m --compile" failed with error code 1 in /tmp/pip-install-1itenkc8/cmake/
Command "/usr/bin/python3 -m pip install --ignore-installed --no-user --prefix / tmp/pip-build-env-zn0x1l9m --no-warn-script-location --no-binary :none: --only-b inary :none: -i https://pypi.org/simple -- setuptools cmake wheel scikit-build n inja" failed with error code 1 in None root@docker:~# root@docker:~# `
Salut,
Le mieux serait de redemarrer le conteneur automatiquement si ca marche avec ton docker https://docs.docker.com/config/containers/start-containers-automatically/
Peux etre en ajoutant --restart unless-stopped a ta ligne de commande ?
Re,
Alors j'ai fais une installe en dcoker comme ceci:
sudo docker run \ --network host \ -e MQTT_HOST=192.168.2.165 \ -e MQTT_USERNAME=docker \ -e MQTT_PASSWORD=docker \ -e MQTT_PUB_TOPIC=home/TheengsGateway/BTtoMQTT \ -e MQTT_SUB_TOPIC=home/TheengsGateway/commands \ -e PUBLISH_ALL=true \ -e TIME_BETWEEN=60 \ -e SCAN_TIME=60 \ -e LOG_LEVEL=DEBUG \ -e HASS_DISCOVERY=true \ -e DISCOVERY=true \ -e DISCOVERY_TOPIC=homeassistant/sensor \ -e DISCOVERY_DEVICE_NAME=TheengsGateway \ -e DISCOVERY_FILTER="[IBEACON,GAEN,MS-CDP]" \ -e SCANNING_MODE=active \ -e ADAPTER=hci0 \ -v /var/run/dbus:/var/run/dbus \ --name TheengsGateway \ theengs/gateway
Que j'au corrigé en supprimant "-- RM" et corrigé la ligne
-e SCANNING_MODE=active
car elle contiens une erreur , et donc installe impossible.
Une fois l'installe faite le conteneur de Theegs, fonctionne quelque minutes et arrête de fonctionné .
J'ai beau choisir Never Always On Failure Unless Stopped
mais rien ne change
J'ai pas encore regardé , je vais regardé , si je fais pas attention voila ce qui ce passe
