Louis van Belle

Hm getting : Host Xen XCP 7.6.3 , NFSv4 enabled Server Debian 9. exports file contains. /srv/nfs4 192.168.xxx.0/24(rw,sync,fsid=0,crossmnt,no_subtree_check,sec=sys:krb5:krb5i:krb5p) /srv/nfs4/xcphosts 192.168.xxx.0/24(rw,sync,no_subtree_check,sec=sys:krb5:krb5i:krb5p) This current setup works for v3/v4/v4.1 with and without kerberos...

running : xe sr-probe type=nfs device-config:server=IP_HERE device-config:probeversion ``` Error code: SR_BACKEND_FAILURE_101 Error parameters: , The request is missing the serverpath parameter, 192.168.xxx.xxx /srv/nfs4/xcphosts 192.168.xxx.0/24 192.168.xxx.xxx /srv/nfs4 192.168.xxx.0/24 ```

yes, sadly i do, i have 3 exact same servers. 2 have now loading disabled, 1 not.. uh... now i look again and its off on all 3 Xen Hosts....

this is last output on a VM. ``` ethtool -k eth0 Features for eth0: rx-checksumming: on [fixed] tx-checksumming: on tx-checksum-ipv4: on [fixed] tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: on tx-checksum-fcoe-crc: off [fixed]...

this is the output of eth0 on HOST ``` Features for eth0: rx-checksumming: off tx-checksumming: off tx-checksum-ipv4: off tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: off tx-checksum-fcoe-crc: off [fixed] tx-checksum-sctp: off [fixed] scatter-gather:...

Thanks guys, i'll have to wait for the weekend to reboot my XCP-NG Serverhosts. so if i understand it right. I apply to the host per UUID (VIF/PIF). i reboot...

So i tripple checked my HOST yesterday, everyting is/was set. all that was still on was this : ``` ethtool --show-offload eth0|grep ": on" generic-receive-offload: on rx-vlan-offload: on tx-vlan-offload: on...

ok, so, if i understand it right now, even the VM shows that, its not applied, only the HOSTS setting are whats about. And a big big thanks Oliver on...

Can above be applied, this still fails on a clean minimal debian buster install. @oerdnj his options works for me.

Hai, thats no problem. What happend here is, or what i suspect. You have parts installed from the Ubuntu Focal kopano packages en you to install the packages from Kopano...