Travis F. Collins

@adisuciu will this break scopy?

gr-iio 3.8 branches do not support 3.9 since it switched from swig to pybindC++. Currently 3.9 is not supported.

You will have to modify the source code to change the number of kernel buffers. Why do you want to change the number of buffers? GNU Radio isn't really great...

Can you explain what you are trying to do? GNU Radio and MATLAB have very different paradigms. -Travis

The sink block operates on buffers. So when it has a full buffer a data it well send that from the host to the radio, and then start queue buffers...

gr-iio has not been upgraded to support 3.9 yet, so it may take some time to address these issues. If you wanted to do it on your own I would...

@FJTor 3.9 is not supported. Either use 3.8 or 3.10

autofilter uses this function call: http://analogdevicesinc.github.io/libad9361-iio/group__TopLevel.html#ga56c31cc700d410be9bdeea3040e62eb3 You would have to call it for each PHY device (ad9361-phy and ad9361-phy-B). pyadi-iio implements these functions in pure python: https://github.com/analogdevicesinc/pyadi-iio/blob/1005113c1c1712cbcf8daedaf5c3a48e30716213/adi/fmcomms5.py#L190 You cannot use...

Here is the normalized response. Note this is a decimate by 4 filter. 

If you want to make the component channels (I and Q independently) available, the number of input ports will need to be updated as well (This section https://github.com/gnuradio/gnuradio/blob/main/gr-iio/grc/iio_fmcomms2_sink.block.yml#L124). This needs...