ioSender
ioSender copied to clipboard
terjeio
A GCode Sender for Grbl and grblHAL written in C# (Windows only).
Keyboard jogging does not work when 2.0.36 XL is connected to legacy Grbl. It worked with earlier edge versions though I have not tested in at least a month.
Hi, I am trying to use ioSender 2.0.35 on a FluidNC controller [(see here)](https://github.com/bdring/FluidNC) . The window opens, shows correct DRO information, but then crashes after a second or so....
Hi ! I´m using estlcam at the moment and mostly happy with it. But especially the CAM part is not the best so I would try something different. grblHal may...
ioSender 2.0.36p15 Controller GRBL 1.1h Atmega328 Started to send code. After switching Console Verbose output programm may stall in ~10 sec. or after switch from Program tab to Console tab...
Sender 2.0.36p11 controller GRBL1.1 Stop button behaviour not as expected: In the program streaming state first pressing of Stop stopped to streaming G-code, but allow controller to complete all commands...
Windows 7, ioSender 2.0.35 On the Probing tab the buttons are placed outside the frame, they cannot be pressed with a mouse but using Tab and Enter they can be....
ioSender 2.0.35 If a Gcode program uses a G20 (Imperial Mode), once it completes, all jogs are 25.4 farther. I think speed is also affected. Work around is to issue...
This post rather test report, then issue highlight Sender 2.0.36.p14 Machine GRBL 1.1h on UNO PC - old notebook without OpenGL support Core2 CPU 2,18GHz Windows7 64bit Used big 3D...
I'm having issues with this on an old laptop running windows 10 IOsender will start and ask if it can create a new config file but then it silently crashes...
