ioSender
ioSender copied to clipboard
terjeio
A GCode Sender for Grbl and grblHAL written in C# (Windows only).
In my though this feature must be on sender(like mach3, Bcnc, etc) and not in firmware. I also though that the working is simple; When M3 or M4 enable respective...
I'm not sure if it's interesting to anyone else, but I was wondering about the potential to add the ability to define temporary machine limits, say, per a loadable file...
Currently when selecting "include z", Z axis is probed last, which means z height needs to be very accurately set before probing to ensure the edge is in the correct...
I've run several jobs now where I've hit the soft limit for ZMIN during gcode execution. The tool is moving down (typically plunging or drilling), but soft limits for X...
Build error
A newbie in visual studio. Downloaded the latest revision of the ioSender source and opened ioSender.sln with Visual Studio 2022. There are 65 errors when building. Here is the screenshot...
Thanks again for all the great work on grblHAL and IOSender. I was working with some folks on the PrintNC Discord today investigating some odd behaviour around spindle on delay...
Basically add an option to use the G59.3 directly as the TLR - Tool length reference. That way it's persistent between resets, and tools are measured compared to a static...
I'm looking for a solution to use the touch probe for material measuring. Right now it seems that when using the touch probe it automatically zeroes the WCS. Wanting to...
Want to propose feature to check probe connection before probe procedure starts. After entering probe page disable to start probing before triggering touchprobe first. This option will help to prevent...
