WFM - Web File Manager

WFM is a lightweight, web based, file manager. You can use it as a web interface for a NAS box, FTP server, a "personal cloud", document sharing site or a lightweight CMS. It allows to perform basic file and folder operations such as download, upload, rename, move, delete files and organize directory tree structure. Text files, such as markup, markdown, config, etc can be edited directly in the browser. WFM can also create and open bookmarks, link and shortcut files, etc.

Usage

WFM is a standalone service with it's own web server. No need for Apache, Nginx, PHP, etc. It runs directly from systemd, sysvinit, launchd, rc or Docker. TLS/SSL is supported with automatic certificate generation by Lets Encrypt / Certbot.

Much like Docker, Kubernetes, Hugo, etc. WFM is written in Go language. The binary is statically linked, fully self contained and has zero external dependencies. Icons are unicode emojis. CA Certs are embedded at built time. No need for Python, PHP, SQL, JavaScript, Node or any other bloat. WFM outputs validated HTML 4.01 without JavaScript. It works on both modern and legacy web browsers going back to Internet Explorer 1.x and Netscape 3.x.

Directory tree

WFM exposes a directory tree via web based interface. The primary method of specifying the root directory is chroot via -chroot=/dir flag, or by your service manager. For example Systemd service file RootDirectory= directive. WFM is not intended to be used without chroot.

For some services like Docker, a subdirectory must be used, this can be specified by --prefix=/subdir:/ flag. A subdirectory should not be considered secure and you should assume users can access files above the prefix up to chroot.

Deployment scenarios

Systemd

You can have either Systemd, or WFM perform chroot and setuid. If you are binding to port 80 (and/or 443), you need to start WFM as root.

WFM as root

Like any other web server, WFM starts the process as root to binds to port 80 or 443. Then it setuids to a desired user specified with -setuid=myuser. Similarly the WFM performs chroot to a directory specified with -chroot=/datadir. An example service file is provided here.

WFM as user

You can specify Systemd User= other than root if you also use RootDirectory= for chroot and use non privileged port (above 1024, eg. 8080), or your binary has adequate capabilities set. Example here.

Systemd Install

To install wfm service file copy it to /etc/systemd/system/wfm.service edit the configuration and run:

$ sudo systemctl daemon-reload
$ sudo systemctl enable --now wfm

Launchd

An example launchd service file is provided here.

Docker

Docker hub: tenox7/wfm:latest GCR.io: gcr.io/tenox7/wrp:latest

Run:

$ docker run -d -p 8080:8080 --user 1234:1234 -v /some/host/dir:/data tenox7/wfm

WFM docker container expects the data directory to be mounted in /data inside the container. This can be overridden with --prefix flag if necessary.

To supply json password file to the docker container you can mount it:

$ docker run -d \
      -p 8080:8080 \
      --user 1234:1234 \
      -v /some/host/dir:/data \
      -v /some/dir/wfmpasswd.json:/etc/wfmusers.json
      tenox7/wfm -passwd=/etc/wfmusers.json

If not using password file you may also need add --nopass_rw.

If you don't specify --user in Docker run, you may also need --allow_root since WFM will be running as user id 0 inside the container.

SSL / TLS / Auto Cert Manager

You can use WFM as a SSL / TLS / https secure web server with Lets Encrypt Auto Cert Manager. ACM will automatically obtain SSL certificate for your site as well as the keypair.

Example deployment with SSL:

ExecStart=/usr/local/sbin/wfm \
	-passwd=/usr/local/etc/wfmpasswd.json \
	-chroot=/var/www/html \
	-setuid=user \
	-addr=:443 \
	-acm_addr=:80 \
	-acm_file=/var/cache/wfm-certs.json \
	-acm_host=www.snakeoil.com

The flag -addr=:443 makes WFM listen on port 443 for https requests. Flag -acm_addr=:80 is used for Auto Cert Manager to obtain the cert and then redirect to port 443/https. Flag -acm_file=/var/cache/wfm-certs.json is where the certificates and keys are stored. This file is opened before chroot.

The -acm_host= is a repeated flag that adds hosts to a whitelist. ACM will only obtain certificates for whitelisted hosts. If your WFM site has multiple names in DNS you need to add them to the whitelist.

If the https site is exposed externally outside of your firewall its sometimes desired to have a local http (non-SSL) listener as well. To enable this use -addr_extra=:8080 flag.

Authentication

Authentication is performed by HTTP Basic Auth (in future a custom login window may be implemented instead). If no password file is specified, or no users present in it (blank) and no hardcoded passwords are present WFM will not ask for username/password. Auth-less mode by will be read-only mode (like a regular web server) unless you specify -nopass_rw flag.

To enable authentication, specify password file via -passwd=/path/users.json flag. Passwords are read on startup and therefore can be placed outside of chroot directory. Passwords can also be hardcoded in the binary, se below.

User Management

Users can be managed using a built-in helper function that services the specified password json file.

Note that any changes to the password file require restart of wfm daemon to take effect. This is because the file is read once on startup before chroot(2) is performed.

Create new blank password file:

$ wfm -passwd=/path/users.json user newfile

Add user:

$ wfm -passwd=/path/users.json user add myuser rw

Delete user:

$ wfm -passwd=/path/users.json user delete myuser

Change password:

$ wfm -passwd=/path/users.json user passwd myuser

JSON password file format

The JSON file can be edited / managed manually.

An example file is provided. The format is a simple list of users with "User", "Salt", "Hash" strings and "RW" boolean field. User is self explanatory. Salt is a short random string used to make passwords harder to crack. It can be anything but it must be different for every user. The same salt must also be passed when generating the password. Hash is a hashed salt + password string. RW boolean specifies if user has read only or read write access.

Binary hardcoded

Password file can also be hardcoded inside the binary at compile time. To add hardcoded users add entries in to users var in auth.go.

Fail to ban

WFM monitors failed user login attempts and bans user for increasing period of time with more bad attempts. This is enabled by default. You can disable this behavior with -f2b=false flag. In addition for debugging purposes you can enable a prefix where ban database will be dumped for example -f2b_dump=/dumpf2b.

Prefix

By default WFM serves requests from "/" prefix of the built in web server. You can move it to a different prefix for example "/data" or "/wfm" with the flag -prefix=/:/httppath.

Flags

Usage of wfm:
  -about_runtime
        Display runtime info in About Dialog (default true)
  -acm_addr string
        autocert manager listen address, eg: :80
  -acm_file string
        autocert cache, eg: /var/cache/wfm-acme.json
  -acm_host value
        autocert manager allowed hostname (multi)
  -addr string
        Listen address, eg: :443 (default ":8080")
  -addr_extra string
        Extra non-TLS listener address, eg: :8081
  -allow_root
        allow to run as uid=0/root without setuid
  -cache_ctl string
        HTTP Header Cache Control (default "no-cache")
  -chroot string
        Directory to chroot to
  -f2b
        ban ip addresses on user/pass failures (default true)
  -f2b_dump string
        enable f2b dump at this prefix, eg. /f2bdump (default no)
  -favicon string
        custom favicon file, empty use default
  -list_archive_contents
        list contents of archives (expensive!)
  -logfile string
        Log file name (default stdout)
  -nopass_rw
        allow read-write access if there is no password file
  -passwd string
        wfm password file, eg: /usr/local/etc/wfmpw.json
  -prefix string
        Prefix for WFM access, /fsdir:/htpath eg.: /var/files:/myfiles (default "/:/")
  -proto string
        tcp, tcp4, tcp6, etc (default "tcp")
  -rate_limit int
        rate limit for upload/download in MB/s, 0 no limit
  -robots
        allow robots
  -setuid string
        Username to setuid to
  -show_dot
        show dot files and folders
  -site_name string
        local site name to display (default "WFM")

History

WFM begun its life around 1994 as a Perl CGI script for CERN httpd server. It was developed to allow uploading logs, dumps and other case data by field support engineers, customers, etc. over the web and as a front end to FTP server. Later rewritten in C language, when CGIC library and Apache httpd were released. Up to 2015 WFM has been a closed source commercial application used for lightweight document management and supported by a few customers. It has since been open sourced. In 2022 WFM has been rewritten in Go as a stand-alone application with built-in web server for more modern deployment scenarios.