TP-Link UB500 (rtl8761b) Linux <5.16 Kernel Patch Guide 🚀

If you're using kernel version > 5.16, this patch should already be working out of the box, you do not need to continue with this guide.

Step #1. ⬇️ Downloading and patching the kernel

First, find out the kernel version you are currently using. Check this by running:

uname -r

Then download the linux kernel, extract and enter the directory:

Example linux kernel version (5.11)

(Replace linux-5.11.tar.xz with your own kernel version)

wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.11.tar.xz
tar xpvf linux-5.11.tar.xz
cd linux-5.11/drivers/bluetooth

Edit btusb.c:

nano btusb.c

Add this, just before the line: /* Silicon Wave based devices */:

/* Tp-Link UB500 */
{ USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK },

Depending on the kernel version you're using, you also might need to change the following inside hci_ldisc.c:

static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
                 unsigned char __user *buf, size_t nr)

to

static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
                 unsigned char __user *buf, size_t nr,
                 void **cookie, unsigned long offset)

Step #2. 🔱 Compiling and updating the kernel

Compile the changed files:

make -C /lib/modules/$(uname -r)/build M=$(pwd) clean
cp /usr/src/linux-headers-$(uname -r)/.config ./
cp /usr/src/linux-headers-$(uname -r)/Module.symvers Module.symvers
make -C /lib/modules/$(uname -r)/build M=$(pwd) modules

If your system is not using secure boot, skip Step #3 and go to Step #4.

Check if your system uses secure boot:

sudo mokutil --sb-state

Step #3. 🔐 Adding a key to the UEFI and signing our kernel module.

Make a new openssl.cnf file and copy paste the following:

# This definition stops the following lines choking if HOME isn't
# defined.
HOME                    = .
RANDFILE                = $ENV::HOME/.rnd 
[ req ]
distinguished_name      = req_distinguished_name
x509_extensions         = v3
string_mask             = utf8only
prompt                  = no

[ req_distinguished_name ]
countryName             = GR
stateOrProvinceName     = Attika
localityName            = Athens
0.organizationName      = Example
commonName              = Secure Boot Signing
emailAddress            = [email protected]

[ v3 ]
subjectKeyIdentifier    = hash
authorityKeyIdentifier  = keyid:always,issuer
basicConstraints        = critical,CA:FALSE
extendedKeyUsage        = codeSigning,1.3.6.1.4.1.311.10.3.6,1.3.6.1.4.1.2312.16.1.2
nsComment               = "OpenSSL Generated Certificate"

Take some time to edit your own details under the [ req_distinguished_name ] section.

Make the public & private keys:

openssl req -config ./openssl.cnf \
        -new -x509 -newkey rsa:2048 \
        -nodes -days 36500 -outform DER \
        -keyout "MOK.priv" \
        -out "MOK.der"

Install public key to the UEFI: (this will ask for a password, use one that you write down, you will need it later):

sudo mokutil --import MOK.der

Before continuing, restart your computer.

Just before the boot begins, you will be greeted with a screen that says Enroll MOK.

Follow the steps on-screen and at the end of the prompt, it will ask you to input the password you wrote down before.

Sign the compiled patched file btusb.ko: linux-5.11/drivers/bluetooth and run

kmodsign sha512 MOK.priv MOK.der btusb.ko

Step #4. ➡️ Installing the kernel module and the firmware

Install the patched kernel module:

sudo cp btusb.ko /lib/modules/$(uname -r)/kernel/drivers/bluetooth
sudo modprobe -r btusb
sudo modprobe -v btusb

Finally, install the bluetooth dongle's firmware:

sudo mkdir -p /lib/firmware/rtl_bt
sudo curl -s https://raw.githubusercontent.com/Realtek-OpenSource/android_hardware_realtek/rtk1395/bt/rtkbt/Firmware/BT/rtl8761b_fw -o /lib/firmware/rtl_bt/rtl8761b_fw.bin

You're ready to go! 📈

Last thing to do is restart your computer and the bluetooth on your UB500 should be working perfectly fine!

Credits:

Thanks @Pilot6!

https://askubuntu.com/questions/1370663/bluetooth-scan-doesnt-detect-any-device-on-ubuntu-21-10

https://github.com/TheSonicMaster/rtl8761b-fw-installer

https://ubuntu.com/blog/how-to-sign-things-for-secure-boot