Paul Carpenter

So lets start with you have a USB keyboard with a special USB to PS2 adapter. See the pinned issue #23 Note USB 2 in its spec says a device...

You need to check voltage levels at the actual connection to the keyboard, before and after a hang before proceeding further. Check your esp32 board can really hadle 5V GPIO,...

I do assume you powered keyboard from 5V pin and added a VIN, all arduino style boards take extrenal 7 -12V power on VIN connector (and pin), which is then...

> Hello, I have the same problem, but I wish to add some more details (at least in my case): > > 1. I'm using a PS2 Keyboard (tested with...

Been busy with family issues for a while. As I do not have any Nano's or the full datasheets etc Try both CLEAR_PENDING_IRQ and NOT and see the reults. As...

Why do you WANT to set Scan Code Set 3 ???? It is a RARELY available OPTIONAL mode hence anything that happens after that is not supported. Even Num Lock...

Without knowing what board you are using and EACH keyboard has its OWN interrupt pin, it is difficult to see what your problem is.

I think you are in the worng place "2.0.0.-rc2" is a version not here as V1.60 is latest here for XMC-for-Arduino If using the public XMC-for-Arduino get release V1.6.0 to...

The URL should be https://github.com/Infineon/XMC-for-Arduino/releases/latest/download/package_infineon_index.json Your's ends in ".jsonn" a typo

@PabloPL do you mean #173 or #179 The first #173 was fixed a year ago The second #179 is new and I p[ersonally do not have resources to verify the...