Filament-Scale-Enhanced
Filament-Scale-Enhanced copied to clipboard
techman83
hi @techman83 is it posible to add another sensor with its own display in octoprint. thanks martin
Hello, I have not seen this plugin before now, have been using Home Assistant & esphome for my scale and rfid tagging, was wondering if it would be a massive...
the reading keeps fluctiation with 10/15g to more or less... we could have a more "inteligent"algoritm to discart strange readings.... assuming the printer takes slow portions in the printing...
A nice feature would be to have several slots to save empty spool weight and give them a name. You could then switch between them as you change filament.
Can you point me in the right direction on how I can get this info into Octodash, would love to mass out spools from dash .
Refactor to support the NAU7802 ADC for weight measurements in addition to the HX711. More details can be found in issue #32. ### Goals 1. Refactor backend to allow for...
I would like to know if there is an ioBroker export possible. I have the octoprint adapter, and it whould be nice to have the actual weight in the objects...
The [NAU7802 ](https://www.nuvoton.com/resource-files/NAU7802%20Data%20Sheet%20V1.7.pdf) ADC is a pretty solid ADC that has one major advantage over the HX711: I2C communication. This allows for much more reliable reads (addressing #28) from higher-level...
Pi's are really expensive rn, 200+ for a 4 and 100+ for a 3+. Having support for non pi boards would help reach this out to more people. If this...
Hi, Python is a script language and not a good language for time-sensitive comms. The HX711 is a very simple device with little tolerance on its comms at 80hz. That's...
