teachingtechYT.github.io

teachingtechYT.github.io copied to clipboard

Hi My first stage of following the calibration pages was to look at e-steps. Issued M92 per the instructions but instead of getting back e-steps I get: Send: M92 Recv:...

nickr1957

A little more documentation on the Extruder E-Steps page

2

Thanks for a great tool! May I suggest mentioning in the text that the E-Steps/mm directive **DEFAULT_AXIS_STEPS_PER_UNIT** in Marlin _Configuration.h_ is the way to bake the new stepper constant into...

gjpc

I did a search and did not find any mention of Slic3r in the issues section (if I did it correctly). Is there any chance you could add Slic3r to...

e415ldc

It is possible to place arbitrary text into the input fields and this will result in gcode with 'NaN's in the file. Verified with the firstlayer page and expected to...

mousethief

I've got a prusa that's typical and and a switchwire that's fast. Running your tower with an acceleration of 4000 which is about the limit of my bed with input...

strayr

Hi as the title states i'm one of those crazy poeple how uses 2.85 mm filament. and it took me 3 hours before i noticed this. maby you can make...

emileballard

Slicer flow calibration works fine, but the file '[cube.stl](https://teachingtechyt.github.io/files/cube.stl)' is not a cube. 30x30x27 mm. Doesn't affect the purpose of the test, but give me a cube and a caliper...

heedm

I also had problems with the cooling of the overhang in temperature tower. #349, #355 You plan to make a fan cooling test / overhang test #120 Maybe testing bridging...

MartinVoelz

for custom fan, the correct value is in gcode, but the wrong value in comment

MartinVoelz

[FR] Part cooling fan speed tower [on the roadmap]

4

On behalf of my patron Bob who has even modeled the geometry ready for the test: https://www.prusaprinters.org/prints/38850-5-tiered-overhang-test The aim is to see the optimum M106 S value for part cooling....

teachingtechYT