teachingtechYT.github.io

teachingtechYT.github.io copied to clipboard

I was looking at re calabarating my printer using my other laptop & was wondering if is was possable to get a printable version of the Steps & Codes, i...

Rigger64

hatkyinc2

Warping of the filament while printing "Temperature Tuning" file

3

Hi, I am trying to print a pure PLA with Prusa i3 MK3+, but I have a problem some layers in the sample have warping which causes a crash of...

SinaFarahifar

I love the idea of the Diagonal Z-Hop, but manually taking my Gcode from S3D, pasting it into your postprocessor, copying it back to my desktop and then Printing THAT...

inspectionsbybob

when setting gcode generator in first layer test it is not changing hotend temp from 200 in the generated gcode. I input 250 but when trying to print it sets...

unkidrik

When slicing today I found an extra wall being printed. A bit confused I found out there is a setting called `Alternate Extra Wall` within Cura. This setting was enabled...

jordy2254

[bug] Generated G-code ignoring printer-set Z offset on E3V2

1

I saw that on all tests, the print was running in midair (i.e., z-offset being ignored). In this [temperature.gcode](https://pastebin.com/UwPv3PWE) (some of the end was cut out due to pastebin limits),...

zurgeg

Suggestion: Option to add Brim to temperature tower

3

I am absolutely loving the comprehensive nature of the tools you have made available here. When I do the temperature tower, though, I find that once it gets to the...

bgcamroux

Hi, After going through the Acceleration Tuning, I assessed my Anycubic Kobra Neo is happy to print at the higher 800mm/s/s without any issues of ghosting or corner corruption. However,...

Domyarus

chnge -> change

Foxxify1