teachingtechYT.github.io
teachingtechYT.github.io copied to clipboard
teachingtechYT
This is based on #343. It removes a lot of limitations of https://github.com/teachingtechYT/teachingtechYT.github.io/pull/344. This adds a built-in support for Octoprint / Klipper+Moonraker setups allowing to directly upload and start print....
When running through some settings to improve my print quality; I was testing my retraction settings using the Retraction Tuning tool and found that the Output Settings Summary lists the...
Please read and adhere to the following guidelines when posting a new issue: 1. Please use the search feature before posting, including already closed issues. Some features have been requested...
[feature request] add option to gcode generator: "label objects". (to enable KAMP adaptive meshing)
Would it be possible to add an option for labeling objects? This would make it possible for klipper users to take advantage of the Klipper Adaptive Meshing & Purging (KAMP).
Firstly, thanks for this great website and extremely useful calibration tools. I know this type of issue has been brought up already (e.g. [#150](https://github.com/teachingtechYT/teachingtechYT.github.io/issues/150) or [#182](https://github.com/teachingtechYT/teachingtechYT.github.io/issues/182) ) but I feel...
Notice no matter what values set in the interactive feedrate/speed table on https://teachingtechyt.github.io/calibration.html#speed it stays at lowest. eg for the default (20,30,40,50,60 tower) file the code generates all layers at...
Seems to be a problem with your g code generator on your website. ALL g code generated is faulty.
Hi, I'm new to 3D and while I'm walking through your calibration steps and watching lots of YouTube (including yours - thank you!) I've seen some recommendations on how and...
I have been printing for few years but only recently learned about skew. It would be nice to include skew under frame check or separate article. Both Marlin and Klipper...
I noticed that the flowrate does not change in higher layers. I had selected the input values 20, 30, 40, 50, 60 which should result in first segment F1200, 2nd...
